Welcome to BoatingForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

water pump

 
   Boating Forums (Home) -> Boat Building RSS
Related Topics:
water pump rebuild - I'm replacing the water pump impeller on a 1980 Johnson 70HP 2 stroke. When I removed the pump housing, there was a small long, 1/8" diameter) round, bullet shaped piece of metal laying inside. Does anyone know what this piece is, and where it..

Looking for 125-150 psi fresh water pump - Need a 12 VDC potable water pump that puts out 125-150 psi at about 1 gal per min - this is low usage so cheap is good. Any

Evinrude 6HP Water pump replacement - I have an older Evinrude 6Hp outboard model number think it is a 1966 model. I am trying to replace the waterpump as it has stopped pumping water. When I remove the 4 bolts holding the foot on, it doesn't pull off the lower unit. Is there..

yanmar ysb12 water pump - My water pump drips with its speed. A pump is going to cost over $500 Has anyone found another pump that will do the same job on a ysb12?

more pump lore - I found a small 12v DC pump and mounting bracket at a rummage sale for $2 in an unopend package which still had the original $45.95 price on it. I thought it was a great bargain galley pump (it says its from B&B Trailer Supplies) for..
Next:  Boat Building: Glenn Ashmore?  
Author Message
jjayotte

External


Since: Sep 01, 2007
Posts: 1



(Msg. 1) Posted: Sat Sep 01, 2007 7:45 pm
Post subject: water pump
Archived from groups: rec>boats>building (more info?)

I have picked up a 1955 QD-16 10hp outboard i got it running good i
just need to service the water pump / impellar, The problem is finding
it. where is the water pump located on this outboard?

 >> Stay informed about: water pump 
Back to top
Login to vote
Matt Colie

External


Since: Jan 31, 2006
Posts: 47



(Msg. 2) Posted: Sun Sep 02, 2007 8:03 am
Post subject: Re: water pump [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Like all of that period OMC.
Undo the little cover on the side and take one screw out of the shift
rod link. Then remove the screws that hold the lower unit to the column
(There may be one that us the other way from the others-memory fade)
and give it a tap with a soft hammer. When the lower unit comes off,
you will see the pump on top of it.
Matt Colie

jjayotte.TakeThisOut@hotmail.com wrote:
> I have picked up a 1955 QD-16 10hp outboard i got it running good i
> just need to service the water pump / impellar, The problem is finding
> it. where is the water pump located on this outboard?
>

 >> Stay informed about: water pump 
Back to top
Login to vote
Display posts from previous:   
   Boating Forums (Home) -> Boat Building All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]