 |
|
|
|
Next: Mariner 20 hp year???
|
| Author |
Message |
External
Since: Jun 13, 2007
Posts: 25
|
(Msg. 1) Posted: Sun Jul 01, 2007 6:54 pm
Post subject: ready to put some boat on my boat
Archived from groups: rec>boats>building (more info?)
|
|
|
So I have posted here in the past about my outrigger sailing canoe
project but have not had much time to post progress updates.
First, we are going with 27' long. The plans use this as the example
of measurements for stretching the hull so the math is much easier
plus my brother just went out and bought a Rinker 250 (25') and put a
2 foot swim step on it so I'll burn in a fiery pit of hell before I
let him beat me. Not to mention that 27' will be good for 4 people to
sail aboard and not loose much performance. It is a canoe after all
and is about 1.5' wide in the main hull. I think it will sail best
with two to three people and I want, just once, to get 25kts.
Second, we got the mold stations up and perfectly straight. It took
a little time here because we didn't want a crooked boat, but you
could calibrate a laser to this thing. We got the lumber for the hull
and have been milling like there is no tomorrow. We are using Redwood
with Mahogany accent strips at the waterline. Right now we have
enough to do about 9 vertical inches of the hull. We need to cut a
lot more.
This week I am going to pick up the bamboo which will be used for the
mast and a few supports on the akas. Next weekend we are planning to
get the strips we milled on the molds and probably mill a bunch more
after that.
We have a long way to go still but I think we are making pretty good
progress considering our limited time and experience. It looks a
little daunting to see the molds up there. It is really big for such
a small boat and everyone says wow that's a lot longer than I thought
it would be. I think when I drop in the ocean and start heading for
Catalina or San Diego I wont think it's so big anymore.
Bill |
|
| Back to top |
|
 | |
External
Since: May 24, 2007
Posts: 36
|
(Msg. 2) Posted: Tue Jul 03, 2007 12:11 pm
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Sun, 01 Jul 2007 18:54:40 -0700, Bill
<williamdochnahl.DeleteThis@adelphia.net> wrote:
>So I have posted here in the past about my outrigger sailing canoe
>project but have not had much time to post progress updates.
>
>First, we are going with 27' long. The plans use this as the example
>of measurements for stretching the hull so the math is much easier
>plus my brother just went out and bought a Rinker 250 (25') and put a
>2 foot swim step on it so I'll burn in a fiery pit of hell before I
>let him beat me. Not to mention that 27' will be good for 4 people to
>sail aboard and not loose much performance. It is a canoe after all
>and is about 1.5' wide in the main hull. I think it will sail best
>with two to three people and I want, just once, to get 25kts.
>
>Second, we got the mold stations up and perfectly straight. It took
>a little time here because we didn't want a crooked boat, but you
>could calibrate a laser to this thing. We got the lumber for the hull
>and have been milling like there is no tomorrow. We are using Redwood
>with Mahogany accent strips at the waterline. Right now we have
>enough to do about 9 vertical inches of the hull. We need to cut a
>lot more.
>
>This week I am going to pick up the bamboo which will be used for the
>mast and a few supports on the akas. Next weekend we are planning to
>get the strips we milled on the molds and probably mill a bunch more
>after that.
>
>We have a long way to go still but I think we are making pretty good
>progress considering our limited time and experience. It looks a
>little daunting to see the molds up there. It is really big for such
>a small boat and everyone says wow that's a lot longer than I thought
>it would be. I think when I drop in the ocean and start heading for
>Catalina or San Diego I wont think it's so big anymore.
>
>Bill
You know? I'd have another think about using bamboo for a mast.
Bamboo is a funny material as even though thoroughly cured it still
warps easily. In addition there are many different types of bamboo -
I'm not a specialist in bamboo but living in Thailand I do come in
contact with it and it is far less rigid then I had once thought.
If you are building a 27 ft. boat you must be thinking about a mast of
about the same length and I would have grave doubts that a single
stick of bamboo is going to be stiff enough.
Bruce in Bangkok
(brucepaigeatgmaildotcom)
--
Posted via a free Usenet account from http://www.teranews.com |
|
| Back to top |
|
| |
External
Since: Jun 13, 2007
Posts: 25
|
(Msg. 3) Posted: Tue Jul 03, 2007 2:12 pm
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Jul 2, 10:11 pm, Bruce <brucepa... RemoveThis @gmail.com> wrote:
> On Sun, 01 Jul 2007 18:54:40 -0700, Bill
>
>
>
>
>
> <williamdochn... RemoveThis @adelphia.net> wrote:
> >So I have posted here in the past about my outrigger sailing canoe
> >project but have not had much time to post progress updates.
>
> >First, we are going with 27' long. The plans use this as the example
> >of measurements for stretching the hull so the math is much easier
> >plus my brother just went out and bought a Rinker 250 (25') and put a
> >2 foot swim step on it so I'll burn in a fiery pit of hell before I
> >let him beat me. Not to mention that 27' will be good for 4 people to
> >sail aboard and not loose much performance. It is a canoe after all
> >and is about 1.5' wide in the main hull. I think it will sail best
> >with two to three people and I want, just once, to get 25kts.
>
> >Second, we got the mold stations up and perfectly straight. It took
> >a little time here because we didn't want a crooked boat, but you
> >could calibrate a laser to this thing. We got the lumber for the hull
> >and have been milling like there is no tomorrow. We are using Redwood
> >with Mahogany accent strips at the waterline. Right now we have
> >enough to do about 9 vertical inches of the hull. We need to cut a
> >lot more.
>
> >This week I am going to pick up the bamboo which will be used for the
> >mast and a few supports on the akas. Next weekend we are planning to
> >get the strips we milled on the molds and probably mill a bunch more
> >after that.
>
> >We have a long way to go still but I think we are making pretty good
> >progress considering our limited time and experience. It looks a
> >little daunting to see the molds up there. It is really big for such
> >a small boat and everyone says wow that's a lot longer than I thought
> >it would be. I think when I drop in the ocean and start heading for
> >Catalina or San Diego I wont think it's so big anymore.
>
> >Bill
>
> You know? I'd have another think about using bamboo for a mast.
> Bamboo is a funny material as even though thoroughly cured it still
> warps easily. In addition there are many different types of bamboo -
> I'm not a specialist in bamboo but living in Thailand I do come in
> contact with it and it is far less rigid then I had once thought.
>
> If you are building a 27 ft. boat you must be thinking about a mast of
> about the same length and I would have grave doubts that a single
> stick of bamboo is going to be stiff enough.
>
> Bruce in Bangkok
> (brucepaigeatgmaildotcom)
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com- Hide quoted text -
>
> - Show quoted text -
I'm treating the bamboo with epoxy on the inside and glassing the
outside. It wont absorb any water and it wont split plus the 10oz.
glass will help to make it a little stiffer and increase the strength
of the material. Bamboo is really strong stuff so I am pretty
confident. I am getting two just in case one breaks and it is fairly
inexpensive material. If it doesn't work I can make a new mast out of
solid wood. >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: Jul 04, 2007
Posts: 18
|
(Msg. 4) Posted: Wed Jul 04, 2007 1:56 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Bruce" <brucepaige RemoveThis @gmail.com> wrote in message
news:mapl83d1rn6cpbard0ndg642eqk1i7mvpg@4ax.com...
> Well, it is your boat of course. But, do give some thought to the
> reasons why people living in bamboo growing areas do not, as a rule,
> use bamboo as mast material even though they may well use it as
> battens in junk type sails.
>
> How are you planning on treating the bamboo , on the inside, with
> epoxy? Drilling a hole in each section and pour in epoxy, slosh it
> around and pour it out?
>
>
>
> Bruce in Bangkok
> (brucepaigeatgmaildotcom)
>
Exactly...bamboo is a great and stong material , temporarily.
Great to roast your sticky rice in, but as a boat building material..... why
would anyone consider using it ?
...Ken >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: Jun 23, 2007
Posts: 8
|
(Msg. 5) Posted: Wed Jul 04, 2007 5:55 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Jul 3, 9:58 pm, "Island Teak" <islandt... DeleteThis @shaw.ca> wrote:
> "Bruce" <brucepa... DeleteThis @gmail.com> wrote in message
>
> news:mapl83d1rn6cpbard0ndg642eqk1i7mvpg@4ax.com...
>
> > Well, it is your boat of course. But, do give some thought to the
> > reasons why people living in bamboo growing areas do not, as a rule,
> > use bamboo as mast material even though they may well use it as
> > battens in junk type sails.
>
> > How are you planning on treating the bamboo , on the inside, with
> > epoxy? Drilling a hole in each section and pour in epoxy, slosh it
> > around and pour it out?
>
> > Bruce in Bangkok
> > (brucepaigeatgmaildotcom)
>
> Exactly...bamboo is a great and stong material , temporarily.
>
> Great to roast your sticky rice in, but as a boat building material..... why
> would anyone consider using it ?
>
> ...Ken
actually it is used in boat building just not by rich folks; my time
in SE aisa was spent looking at boats made of bamboo either bundeled
or single lashed boats. these are all small water craft that see use
and repair often. the stuff is just not used long term. OTH treated
bamboo seems like a really good idea since the thing makeing it
unsuitable for boat building is it's splitting. IMO glassed and
internaly coated would work well. sorry folks i have built several
commercial fishing boats and have almost always tried to figure a way
to use bamboo. >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: May 24, 2007
Posts: 36
|
(Msg. 6) Posted: Wed Jul 04, 2007 7:19 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Tue, 03 Jul 2007 14:12:06 -0700, Bill
<williamdochnahl.RemoveThis@adelphia.net> wrote:
>On Jul 2, 10:11 pm, Bruce <brucepa....RemoveThis@gmail.com> wrote:
>> On Sun, 01 Jul 2007 18:54:40 -0700, Bill
>>
>>
>>
>>
>>
>> <williamdochn....RemoveThis@adelphia.net> wrote:
>> >So I have posted here in the past about my outrigger sailing canoe
>> >project but have not had much time to post progress updates.
>>
>> >First, we are going with 27' long. The plans use this as the example
>> >of measurements for stretching the hull so the math is much easier
>> >plus my brother just went out and bought a Rinker 250 (25') and put a
>> >2 foot swim step on it so I'll burn in a fiery pit of hell before I
>> >let him beat me. Not to mention that 27' will be good for 4 people to
>> >sail aboard and not loose much performance. It is a canoe after all
>> >and is about 1.5' wide in the main hull. I think it will sail best
>> >with two to three people and I want, just once, to get 25kts.
>>
>> >Second, we got the mold stations up and perfectly straight. It took
>> >a little time here because we didn't want a crooked boat, but you
>> >could calibrate a laser to this thing. We got the lumber for the hull
>> >and have been milling like there is no tomorrow. We are using Redwood
>> >with Mahogany accent strips at the waterline. Right now we have
>> >enough to do about 9 vertical inches of the hull. We need to cut a
>> >lot more.
>>
>> >This week I am going to pick up the bamboo which will be used for the
>> >mast and a few supports on the akas. Next weekend we are planning to
>> >get the strips we milled on the molds and probably mill a bunch more
>> >after that.
>>
>> >We have a long way to go still but I think we are making pretty good
>> >progress considering our limited time and experience. It looks a
>> >little daunting to see the molds up there. It is really big for such
>> >a small boat and everyone says wow that's a lot longer than I thought
>> >it would be. I think when I drop in the ocean and start heading for
>> >Catalina or San Diego I wont think it's so big anymore.
>>
>> >Bill
>>
>> You know? I'd have another think about using bamboo for a mast.
>> Bamboo is a funny material as even though thoroughly cured it still
>> warps easily. In addition there are many different types of bamboo -
>> I'm not a specialist in bamboo but living in Thailand I do come in
>> contact with it and it is far less rigid then I had once thought.
>>
>> If you are building a 27 ft. boat you must be thinking about a mast of
>> about the same length and I would have grave doubts that a single
>> stick of bamboo is going to be stiff enough.
>>
>> Bruce in Bangkok
>> (brucepaigeatgmaildotcom)
>>
>> --
>> Posted via a free Usenet account fromhttp://www.teranews.com- Hide quoted text -
>>
>> - Show quoted text -
>
>I'm treating the bamboo with epoxy on the inside and glassing the
>outside. It wont absorb any water and it wont split plus the 10oz.
>glass will help to make it a little stiffer and increase the strength
>of the material. Bamboo is really strong stuff so I am pretty
>confident. I am getting two just in case one breaks and it is fairly
>inexpensive material. If it doesn't work I can make a new mast out of
>solid wood.
Well, it is your boat of course. But, do give some thought to the
reasons why people living in bamboo growing areas do not, as a rule,
use bamboo as mast material even though they may well use it as
battens in junk type sails.
How are you planning on treating the bamboo , on the inside, with
epoxy? Drilling a hole in each section and pour in epoxy, slosh it
around and pour it out?
Bruce in Bangkok
(brucepaigeatgmaildotcom)
--
Posted via a free Usenet account from http://www.teranews.com >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: Jun 22, 2003
Posts: 434
|
(Msg. 7) Posted: Wed Jul 04, 2007 8:42 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Wed, 04 Jul 2007 09:00:07 -0000, Two meter troll
<eawisner DeleteThis @gmail.com> wrote:
[bamboo]
>actually it is used in boat building just not by rich folks; my time
>in SE aisa was spent looking at boats made of bamboo either bundeled
>or single lashed boats. these are all small water craft that see use
>and repair often. the stuff is just not used long term. OTH treated
>bamboo seems like a really good idea since the thing makeing it
>unsuitable for boat building is it's splitting. IMO glassed and
>internaly coated would work well. sorry folks i have built several
>commercial fishing boats and have almost always tried to figure a way
>to use bamboo.
Which reminds me: a century ago, one of the earliest flying machines
was made of bamboo.
Brian Whatcott Altus OK >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: Jun 13, 2007
Posts: 25
|
(Msg. 8) Posted: Wed Jul 04, 2007 11:16 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Jul 3, 5:19 pm, Bruce <brucepa....RemoveThis@gmail.com> wrote:
> On Tue, 03 Jul 2007 14:12:06 -0700, Bill
>
>
>
> <williamdochn....RemoveThis@adelphia.net> wrote:
> >On Jul 2, 10:11 pm, Bruce <brucepa....RemoveThis@gmail.com> wrote:
> >> On Sun, 01 Jul 2007 18:54:40 -0700, Bill
>
> >> <williamdochn....RemoveThis@adelphia.net> wrote:
> >> >So I have posted here in the past about my outrigger sailing canoe
> >> >project but have not had much time to post progress updates.
>
> >> >First, we are going with 27' long. The plans use this as the example
> >> >of measurements for stretching the hull so the math is much easier
> >> >plus my brother just went out and bought a Rinker 250 (25') and put a
> >> >2 foot swim step on it so I'll burn in a fiery pit of hell before I
> >> >let him beat me. Not to mention that 27' will be good for 4 people to
> >> >sail aboard and not loose much performance. It is a canoe after all
> >> >and is about 1.5' wide in the main hull. I think it will sail best
> >> >with two to three people and I want, just once, to get 25kts.
>
> >> >Second, we got the mold stations up and perfectly straight. It took
> >> >a little time here because we didn't want a crooked boat, but you
> >> >could calibrate a laser to this thing. We got the lumber for the hull
> >> >and have been milling like there is no tomorrow. We are using Redwood
> >> >with Mahogany accent strips at the waterline. Right now we have
> >> >enough to do about 9 vertical inches of the hull. We need to cut a
> >> >lot more.
>
> >> >This week I am going to pick up the bamboo which will be used for the
> >> >mast and a few supports on the akas. Next weekend we are planning to
> >> >get the strips we milled on the molds and probably mill a bunch more
> >> >after that.
>
> >> >We have a long way to go still but I think we are making pretty good
> >> >progress considering our limited time and experience. It looks a
> >> >little daunting to see the molds up there. It is really big for such
> >> >a small boat and everyone says wow that's a lot longer than I thought
> >> >it would be. I think when I drop in the ocean and start heading for
> >> >Catalina or San Diego I wont think it's so big anymore.
>
> >> >Bill
>
> >> You know? I'd have another think about using bamboo for a mast.
> >> Bamboo is a funny material as even though thoroughly cured it still
> >> warps easily. In addition there are many different types of bamboo -
> >> I'm not a specialist in bamboo but living in Thailand I do come in
> >> contact with it and it is far less rigid then I had once thought.
>
> >> If you are building a 27 ft. boat you must be thinking about a mast of
> >> about the same length and I would have grave doubts that a single
> >> stick of bamboo is going to be stiff enough.
>
> >> Bruce in Bangkok
> >> (brucepaigeatgmaildotcom)
>
> >> --
> >> Posted via a free Usenet account fromhttp://www.teranews.com-Hide quoted text -
>
> >> - Show quoted text -
>
> >I'm treating the bamboo with epoxy on the inside and glassing the
> >outside. It wont absorb any water and it wont split plus the 10oz.
> >glass will help to make it a little stiffer and increase the strength
> >of the material. Bamboo is really strong stuff so I am pretty
> >confident. I am getting two just in case one breaks and it is fairly
> >inexpensive material. If it doesn't work I can make a new mast out of
> >solid wood.
>
> Well, it is your boat of course. But, do give some thought to the
> reasons why people living in bamboo growing areas do not, as a rule,
> use bamboo as mast material even though they may well use it as
> battens in junk type sails.
>
> How are you planning on treating the bamboo , on the inside, with
> epoxy? Drilling a hole in each section and pour in epoxy, slosh it
> around and pour it out?
>
> Bruce in Bangkok
> (brucepaigeatgmaildotcom)
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
Cut it in half, clean it out and coat with epoxy. Then epoxy the two
halves back together and put a biaxial fiberglass tube over the
outside. Resin sand varnish. Bamboo has been used in boat building
for a really long time. >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: May 24, 2007
Posts: 36
|
(Msg. 9) Posted: Thu Jul 05, 2007 7:05 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Wed, 04 Jul 2007 09:00:07 -0000, Two meter troll
<eawisner.RemoveThis@gmail.com> wrote:
>On Jul 3, 9:58 pm, "Island Teak" <islandt....RemoveThis@shaw.ca> wrote:
>> "Bruce" <brucepa....RemoveThis@gmail.com> wrote in message
>>
>> news:mapl83d1rn6cpbard0ndg642eqk1i7mvpg@4ax.com...
>>
>> > Well, it is your boat of course. But, do give some thought to the
>> > reasons why people living in bamboo growing areas do not, as a rule,
>> > use bamboo as mast material even though they may well use it as
>> > battens in junk type sails.
>>
>> > How are you planning on treating the bamboo , on the inside, with
>> > epoxy? Drilling a hole in each section and pour in epoxy, slosh it
>> > around and pour it out?
>>
>> > Bruce in Bangkok
>> > (brucepaigeatgmaildotcom)
>>
>> Exactly...bamboo is a great and stong material , temporarily.
>>
>> Great to roast your sticky rice in, but as a boat building material..... why
>> would anyone consider using it ?
>>
>> ...Ken
>
>
>actually it is used in boat building just not by rich folks; my time
>in SE aisa was spent looking at boats made of bamboo either bundeled
>or single lashed boats. these are all small water craft that see use
>and repair often. the stuff is just not used long term. OTH treated
>bamboo seems like a really good idea since the thing makeing it
>unsuitable for boat building is it's splitting. IMO glassed and
>internaly coated would work well. sorry folks i have built several
>commercial fishing boats and have almost always tried to figure a way
>to use bamboo.
Well, I've lived in SE Asia for 30 years and I haven't seen bamboo
used to build boats. What I have seen is bamboo used to build rafts by
lashing bundles of bamboo together -- by people too poor to be able to
afford wooden boats.
I have also seen it used to make battens for junk type sails where it
lasted about one year. I did ask the blokes running the junk "why
bamboo" and they answered "cheap".
Probably some of the last commercial sailing boats were the Bugis
schooners from S. Sulawasi that didn't use bamboo to build their
boats.
Bruce in Bangkok
(brucepaigeatgmaildotcom)
--
Posted via a free Usenet account from http://www.teranews.com >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: Jun 23, 2007
Posts: 8
|
(Msg. 10) Posted: Thu Jul 05, 2007 7:48 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Jul 4, 5:05 pm, Bruce <brucepa....RemoveThis@gmail.com> wrote:
> On Wed, 04 Jul 2007 09:00:07 -0000, Two meter troll
>
>
>
> <eawis....RemoveThis@gmail.com> wrote:
> >On Jul 3, 9:58 pm, "Island Teak" <islandt....RemoveThis@shaw.ca> wrote:
> >> "Bruce" <brucepa....RemoveThis@gmail.com> wrote in message
>
> >>news:mapl83d1rn6cpbard0ndg642eqk1i7mvpg@4ax.com...
>
> >> > Well, it is your boat of course. But, do give some thought to the
> >> > reasons why people living in bamboo growing areas do not, as a rule,
> >> > use bamboo as mast material even though they may well use it as
> >> > battens in junk type sails.
>
> >> > How are you planning on treating the bamboo , on the inside, with
> >> > epoxy? Drilling a hole in each section and pour in epoxy, slosh it
> >> > around and pour it out?
>
> >> > Bruce in Bangkok
> >> > (brucepaigeatgmaildotcom)
>
> >> Exactly...bamboo is a great and stong material , temporarily.
>
> >> Great to roast your sticky rice in, but as a boat building material..... why
> >> would anyone consider using it ?
>
> >> ...Ken
>
> >actually it is used in boat building just not by rich folks; my time
> >in SE aisa was spent looking at boats made of bamboo either bundeled
> >or single lashed boats. these are all small water craft that see use
> >and repair often. the stuff is just not used long term. OTH treated
> >bamboo seems like a really good idea since the thing makeing it
> >unsuitable for boat building is it's splitting. IMO glassed and
> >internaly coated would work well. sorry folks i have built several
> >commercial fishing boats and have almost always tried to figure a way
> >to use bamboo.
>
> Well, I've lived in SE Asia for 30 years and I haven't seen bamboo
> used to build boats. What I have seen is bamboo used to build rafts by
> lashing bundles of bamboo together -- by people too poor to be able to
> afford wooden boats.
>
> I have also seen it used to make battens for junk type sails where it
> lasted about one year. I did ask the blokes running the junk "why
> bamboo" and they answered "cheap".
>
> Probably some of the last commercial sailing boats were the Bugis
> schooners from S. Sulawasi that didn't use bamboo to build their
> boats.
>
> Bruce in Bangkok
> (brucepaigeatgmaildotcom)
>
> --
> Posted via a free Usenet account fromhttp://www.teranews.com
modern:
http://www.bambooboats.com/prototype.html
traditional:
http://www.bamboocraft.net/gallery/showgallery.php?cat=3043
http://www.vietnamboats.org/bambooboats.htm >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: Jun 23, 2007
Posts: 8
|
(Msg. 11) Posted: Thu Jul 05, 2007 8:05 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Jul 5, 12:48 am, Two meter troll <eawis... DeleteThis @gmail.com> wrote:
> On Jul 4, 5:05 pm, Bruce <brucepa... DeleteThis @gmail.com> wrote:
>
>
>
> > On Wed, 04 Jul 2007 09:00:07 -0000, Two meter troll
>
> > <eawis... DeleteThis @gmail.com> wrote:
> > >On Jul 3, 9:58 pm, "Island Teak" <islandt... DeleteThis @shaw.ca> wrote:
> > >> "Bruce" <brucepa... DeleteThis @gmail.com> wrote in message
>
> > >>news:mapl83d1rn6cpbard0ndg642eqk1i7mvpg@4ax.com...
>
> > >> > Well, it is your boat of course. But, do give some thought to the
> > >> > reasons why people living in bamboo growing areas do not, as a rule,
> > >> > use bamboo as mast material even though they may well use it as
> > >> > battens in junk type sails.
>
> > >> > How are you planning on treating the bamboo , on the inside, with
> > >> > epoxy? Drilling a hole in each section and pour in epoxy, slosh it
> > >> > around and pour it out?
>
> > >> > Bruce in Bangkok
> > >> > (brucepaigeatgmaildotcom)
>
> > >> Exactly...bamboo is a great and stong material , temporarily.
>
> > >> Great to roast your sticky rice in, but as a boat building material..... why
> > >> would anyone consider using it ?
>
> > >> ...Ken
>
> > >actually it is used in boat building just not by rich folks; my time
> > >in SE aisa was spent looking at boats made of bamboo either bundeled
> > >or single lashed boats. these are all small water craft that see use
> > >and repair often. the stuff is just not used long term. OTH treated
> > >bamboo seems like a really good idea since the thing makeing it
> > >unsuitable for boat building is it's splitting. IMO glassed and
> > >internaly coated would work well. sorry folks i have built several
> > >commercial fishing boats and have almost always tried to figure a way
> > >to use bamboo.
>
> > Well, I've lived in SE Asia for 30 years and I haven't seen bamboo
> > used to build boats. What I have seen is bamboo used to build rafts by
> > lashing bundles of bamboo together -- by people too poor to be able to
> > afford wooden boats.
>
> > I have also seen it used to make battens for junk type sails where it
> > lasted about one year. I did ask the blokes running the junk "why
> > bamboo" and they answered "cheap".
>
> > Probably some of the last commercial sailing boats were the Bugis
> > schooners from S. Sulawasi that didn't use bamboo to build their
> > boats.
>
> > Bruce in Bangkok
> > (brucepaigeatgmaildotcom)
>
> > --
> > Posted via a free Usenet account fromhttp://www.teranews.com
>
> modern:
>
> http://www.bambooboats.com/prototype.html
>
> traditional:
>
> http://www.bamboocraft.net/gallery/showgallery.php?cat=3043
>
> http://www.vietnamboats.org/bambooboats.htm
sorry i forgot a couple:
http://www.acclaimimages.com/search_terms/bamboo_boat.html
http://www.asiacard.co.uk/ecard929.html >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: Jun 13, 2007
Posts: 25
|
(Msg. 12) Posted: Thu Jul 05, 2007 10:30 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
> Why would it not absorb water? Epoxy is not water proof, water
> resistant yes, proof, no.
I'm not leaving it in the water. It is going to be stored on land.
Both ends swill be plugged. You can argue the ideal possibilities all
day but its basically doing a wood/fiberglass composite structure
using bamboo. Bamboo is a very strong natural structure and I am
using a pole much wider than recommended to increase strength even
more. You and Bruce don't have to sail on it. I need it light weight
to go faster and get better handling characterisitcs. Why do you care
so much? Have you ever tried it? Are you invested in my project in
some way? Why not just say 'good luck and let me know if it works
out'? >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: Jun 13, 2007
Posts: 25
|
(Msg. 13) Posted: Thu Jul 05, 2007 10:57 am
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Jun 13, 2007
Posts: 25
|
(Msg. 14) Posted: Thu Jul 05, 2007 12:20 pm
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
> Well, sorry you are so defensive. The reason I care is this is a
> builders group, and I am a builder. You came here for help (unless you
> are just dreaming and bragging) and I thought I was helping. Screw you
> though, I won't make that mistake again. I can't imagine coming to
> someone for help, then turning into an ahole when you hear something
> you don't want to hear or address, but that's just me.
I posted an update of my build for all the people that might be
interested and I immediately get replies of 'why would you do that,
that wont ever work and it's not a good idea' from people that have
never tried it before. The responses I got from you and Bruce were
very harsh and from people that have not even stated any experience
with this material. In my experience when two people interested in
building something are talking a project it is more constructive than
that. You ask questions if you don't know and make polite
suggestions, you don't say things like it could never be a permanent
solution, if you haven't tried it. You don't jump all over someone
that has been planning or many months after thingkin about it for five
minutes. Sorry if I seem a bit defensive but I came here to share and
post a little something to an otherwise low active group and I get
attacked by several people that think they know everything. Next time
you try to help someone maybe you could be polite about it. That goes
for Bruce even more, just because you never did it doesn't mean it
can't be done. >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
External
Since: Jun 02, 2007
Posts: 737
|
(Msg. 15) Posted: Thu Jul 05, 2007 1:56 pm
Post subject: Re: ready to put some boat on my boat [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Jul 3, 5:12 pm, Bill <williamdochn....TakeThisOut@adelphia.net> wrote:
> On Jul 2, 10:11 pm, Bruce <brucepa....TakeThisOut@gmail.com> wrote:
>
>
>
>
>
> > On Sun, 01 Jul 2007 18:54:40 -0700, Bill
>
> > <williamdochn....TakeThisOut@adelphia.net> wrote:
> > >So I have posted here in the past about my outrigger sailing canoe
> > >project but have not had much time to post progress updates.
>
> > >First, we are going with 27' long. The plans use this as the example
> > >of measurements for stretching the hull so the math is much easier
> > >plus my brother just went out and bought a Rinker 250 (25') and put a
> > >2 foot swim step on it so I'll burn in a fiery pit of hell before I
> > >let him beat me. Not to mention that 27' will be good for 4 people to
> > >sail aboard and not loose much performance. It is a canoe after all
> > >and is about 1.5' wide in the main hull. I think it will sail best
> > >with two to three people and I want, just once, to get 25kts.
>
> > >Second, we got the mold stations up and perfectly straight. It took
> > >a little time here because we didn't want a crooked boat, but you
> > >could calibrate a laser to this thing. We got the lumber for the hull
> > >and have been milling like there is no tomorrow. We are using Redwood
> > >with Mahogany accent strips at the waterline. Right now we have
> > >enough to do about 9 vertical inches of the hull. We need to cut a
> > >lot more.
>
> > >This week I am going to pick up the bamboo which will be used for the
> > >mast and a few supports on the akas. Next weekend we are planning to
> > >get the strips we milled on the molds and probably mill a bunch more
> > >after that.
>
> > >We have a long way to go still but I think we are making pretty good
> > >progress considering our limited time and experience. It looks a
> > >little daunting to see the molds up there. It is really big for such
> > >a small boat and everyone says wow that's a lot longer than I thought
> > >it would be. I think when I drop in the ocean and start heading for
> > >Catalina or San Diego I wont think it's so big anymore.
>
> > >Bill
>
> > You know? I'd have another think about using bamboo for a mast.
> > Bamboo is a funny material as even though thoroughly cured it still
> > warps easily. In addition there are many different types of bamboo -
> > I'm not a specialist in bamboo but living in Thailand I do come in
> > contact with it and it is far less rigid then I had once thought.
>
> > If you are building a 27 ft. boat you must be thinking about a mast of
> > about the same length and I would have grave doubts that a single
> > stick of bamboo is going to be stiff enough.
>
> > Bruce in Bangkok
> > (brucepaigeatgmaildotcom)
>
> > --
> > Posted via a free Usenet account fromhttp://www.teranews.com-Hide quoted text -
>
> > - Show quoted text -
>
> I'm treating the bamboo with epoxy on the inside and glassing the
> outside. It wont absorb any water
Why would it not absorb water? Epoxy is not water proof, water
resistant yes, proof, no.
> and it wont split plus the 10oz.
> glass will help to make it a little stiffer and increase the strength
> of the material. Bamboo is really strong stuff so I am pretty
> confident. I am getting two just in case one breaks and it is fairly
> inexpensive material. If it doesn't work I can make a new mast out of
> solid wood.
Keep your solid wood handy 
- Hide quoted text -
>
> - Show quoted text - >> Stay informed about: ready to put some boat on my boat |
|
| Back to top |
|
| |
| Related Topics: | Jon Boat - I recently bought a 2004 10' Alumacraft Jon Boat with a Endura 30 12volt Trolling Motor. I have no experience with this before, but I'd like to put in a few of upgrades to the boat to both make it a more enjoyable fishing/creek boat. I will use the boa...
cat boat - I am a UK builder - have finished a selway sisher coble am considering building a 14 foot cat boat - from wooden boat magazine just wondered how these things sail - seaworthiness, comfort, upwind performance etc etc dylan
My Boat - Since we are posting links....CHAZ 1 http://media18.hypernet.com/mywb/scripts/show.asp?state=detail&boatid=1151
Do-all boat? - Is anyone aware of a boat, or plans for a boat, that would encompass light weight (<1500lb), trailability, 16 - 22 ft, able to plane at high speed on a relatively small motor (15-25 mph on 25-50 hp), cabin to accommodate two people for at least..
alu-boat - i'm looking for plans about sailboat 33/35 ft- aluminium body for long cruises . Someone can help me? Thanks for all. Corrado from Italy |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
