Need help - Kawasaki 1999 STX900 with no spark problem

Have a 1999 Kawasaki STX 900 that won't start. Checked for spark but
not getting any. Fuses check good and display and starter work fine.
Continuity checked the kill switch (at the switch itself) and checked
ok.
Is this a wiring problem or ignition module? If so where can I get a
wiring diagram as my owners manual doesn't come with one. Can anyone
out there e-mail me a scanned diagram?
Also has anyone out there been having trouble with this make and
model getting it to start. Have to crank it forever or use starting
fluid to start it. Is this normal.
Any help appreciated,
mikecook DeleteThis @charted.net

I have seen quite a few ignition switches fail. You might check that.
<mikecook DeleteThis @charter.net> wrote in message
news:3i1ug0pq0mfubrove33u73io1j3parmcc9@4ax.com...
 > Have a 1999 Kawasaki STX 900 that won't start. Checked for spark but
 > not getting any. Fuses check good and display and starter work fine.
 > Continuity checked the kill switch (at the switch itself) and checked
 > ok.
 > Is this a wiring problem or ignition module? If so where can I get a
 > wiring diagram as my owners manual doesn't come with one. Can anyone
 > out there e-mail me a scanned diagram?
 > Also has anyone out there been having trouble with this make and
 > model getting it to start. Have to crank it forever or use starting
 > fluid to start it. Is this normal.
 > Any help appreciated,
 > mikecook DeleteThis @charted.net<!-- ~MESSAGE_AFTER~ -->