bas gasket thikness for 97 xp800

I am re-building my 97 xp800, and my gasket kit somes with 3 different
base gasket thikness. I just honed the cylinders, and did not change
any compression by way of head milling. Does anyone knwo what gasket I
should use? It came with 1mm, .5mm, and .25mm gaskets.

Thanks in advance, and yes I throgh away the orginal and did not not
it's thickness ..oops ;>

Al

Al
You will need to check your squish when you reassemble the motor- it is the
only way you will know if your gasket is the right one without having the
original.


"sled-jetski" wrote in message

>I am re-building my 97 xp800, and my gasket kit somes with 3 different
> base gasket thikness. I just honed the cylinders, and did not change
> any compression by way of head milling. Does anyone knwo what gasket I
> should use? It came with 1mm, .5mm, and .25mm gaskets.
>
> Thanks in advance, and yes I throgh away the orginal and did not not
> it's thickness ..oops ;>
>
> Al
>