Yanmar 1GM10 3 view drawing

Welcome to BoatingForumz.com!

FAQ

Profile

Private Messages

Yanmar 1GM10 3 view drawing

Boating Forums (Home) -> Boat Building

Next: Under deck foam soaked; solutions?

Author

Message

Curtis

External

Since: Jan 28, 2004
Posts: 1

(Msg. 1) Posted: Wed Jan 28, 2004 7:50 pm
Post subject: Yanmar 1GM10 3 view drawing
Archived from groups: rec>boats>building (more info?)

I am looking for a source for a 3 view CAD (any format) drawing of this
engine. Thanks

>> Stay informed about: Yanmar 1GM10 3 view drawing

Login to vote

terry1

External

Since: Nov 05, 2003
Posts: 14

(Msg. 2) Posted: Wed Jan 28, 2004 7:50 pm Post subject: Re: Yanmar 1GM10 3 view drawing [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

you might be able to go to their website and find dxf drawings but i doubt you will find the 3d cad drawings. i had the same issue with westerburke so i downloaded the dxf and created the 3d drawings. good luck >> Stay informed about: Yanmar 1GM10 3 view drawing

Login to vote

P.C.

External

Since: Mar 21, 2004
Posts: 75

(Msg. 3) Posted: Thu Jan 29, 2004 1:06 am Post subject: Re: Yanmar 1GM10 3 view drawing [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

Hi "terry" <tgfrenchNOSPAM DeleteThis @bellsouth.net> skrev i en meddelelse news:DASRb.66385$lh3.44549@bignews5.bellsouth.net... > you might be able to go to their website and find dxf drawings but i doubt > you will find the 3d cad drawings. > > i had the same issue with westerburke so i downloaded the dxf and created > the 3d drawings. > > good luck > If you can get your hands on tradisional top, side, fornt view drawings, you don't need much CAD skills, to produce a Solid with the same proportions as the engine. If what you need, is a Solid to subtract the engine foundations so the engine will fit exactly in a new designs framework , 3 section drawings is almost as good as a 3D model, ------- but you don't write if you want a 3D true model, or just a shaped outher limits Solid. P.C. <a style='text-decoration: underline;' href="http://www.designcommunity.com/scrapbook/2995.html" target="_blank">http://www.designcommunity.com/scrapbook/2995.html</a><!-- ~MESSAGE_AFTER~ --> >> Stay informed about: Yanmar 1GM10 3 view drawing

Login to vote

Display posts from previous:

Related Topics:

Need Jacks drawing. - I am looking a building some steel jacks to support sailboat for winter storage. I do not know if there is a universal standard or do they differs from boat yard to boat yard. TIA

Back to the drawing board? - Sketch for the new interior arrangement for my boat. New lockers to starboard! http://www.home.earthlink.net/~cavelamb/c18-cab.htm Richard

yanmar - I have a yanmar 2 cylinder diesel that I want to install into a 26' balboa sailboat. This motor was formerly used in a non marine envirnment. Im entertaining the idea of remodeling the stern of this boat to accomadate this engine. ..

Yanmar or Westerbeke? - I've got a 1966 Hinckley Pilot with a 1978 Westerbeke 40 HP diesel that is probably on its last legs. Would much appreciate anyone's wisdom/experience on choosing a replacement diesel. My yard is recommending another Westerbeke but all the sailors I..

Installing a saildrive Yanmar into a 32 Pearson - I am rebuilding a Pearson 32 which currently has a Universal 11 Hp. I want to install a new engine and thinking about the Yanmar Sail Drive unit instead of the traditional shaft driven props. Has anyone attempted this operation before and does anyone..

	Boating Forums (Home) -> Boat Building	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

[ Contact us | Terms of Service/Privacy Policy ]