Welcome to BoatingForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Wanted: An EXHAUST MANIFOLD for a Volvo Penta AQ131A.

  
   Boating Forums (Home) -> Boat General Discussion RSS
Next:  Now, tear it up!  
Author Message
Captaingo

External


Since: Dec 07, 2007
Posts: 3



(Msg. 1) Posted: Sun Dec 16, 2007 2:06 pm
Post subject: Wanted: An EXHAUST MANIFOLD for a Volvo Penta AQ131A.
Archived from groups: rec>boats (more info?)
Looking for the exhaust manifold with separate chambers, new or used
(in good condition) is fine.

Trying to protect my engine from water entry into the #4 cylinder
exhaust port I am repairing the damage caused to the #4 exhaust
valve, due to not having the "good" manifold before.

 >> Stay informed about: Wanted: An EXHAUST MANIFOLD for a Volvo Penta AQ131A. 
Back to top
Login to vote
jamesgangnc

External


Since: Apr 27, 2007
Posts: 195



(Msg. 2) Posted: Sun Dec 16, 2007 5:32 pm
Post subject: Re: Wanted: An EXHAUST MANIFOLD for a Volvo Penta AQ131A. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Can't you put a riser extension on it?

"Captaingo" <captaingo.RemoveThis@aol.com> wrote in message
news:c8fc3fb2-11c0-4d47-ae60-a7972185e2ed@i12g2000prf.googlegroups.com...
> Looking for the exhaust manifold with separate chambers, new or used
> (in good condition) is fine.
>
> Trying to protect my engine from water entry into the #4 cylinder
> exhaust port I am repairing the damage caused to the #4 exhaust
> valve, due to not having the "good" manifold before.

 >> Stay informed about: Wanted: An EXHAUST MANIFOLD for a Volvo Penta AQ131A. 
Back to top
Login to vote
Captaingo

External


Since: Dec 07, 2007
Posts: 3



(Msg. 3) Posted: Tue Dec 18, 2007 2:27 pm
Post subject: Re: Wanted: An EXHAUST MANIFOLD for a Volvo Penta AQ131A. [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Dec 16, 2:32�pm, "jamesgangnc" <ja....TakeThisOut@nospam.com> wrote:
> Can't you put a riser extension on it?
>
> "Captaingo" <captai....TakeThisOut@aol.com> wrote in message
>
> news:c8fc3fb2-11c0-4d47-ae60-a7972185e2ed@i12g2000prf.googlegroups.com...
>
>
>
> > Looking for the exhaust manifold with separate chambers, new or used
> > (in good condition) is fine.
>
> > Trying to protect my engine from water entry into the #4 cylinder
> > exhaust port �I am repairing the damage caused to the #4 exhaust
> > valve, due to not having the "good" manifold before.- Hide quoted text -
>
> - Show quoted text -

I don't know if I can put a riser on it. Will that prevent the vaccum
created to the #4 cylinder from the #1-3 cylinders?
 >> Stay informed about: Wanted: An EXHAUST MANIFOLD for a Volvo Penta AQ131A. 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Looking for a used, in good shape, Volvo Penta AQ manifold - I am looking for the manifold that is made by Volvo with separate chambers for each cylinder which run all the way down the throat of the manifold. It is galvanized and sells new for $700, that is why I am looking for a used one. The new manifolds fro...

Question Volvo Penta Cobra Exhaust Flaps - I have a 1995 Four Winns Freedom with a Volvo Penta engine and cobra outdrive. The exhaust flaps have been a topic of discussion at my local marina. I have recently checked the flaps and one was missing, seems it was melted off the SS rod in which it..

Need a Head for Volvo AQ131a - Anyone have or know a source for a new or good used head for a volvo penta AQ131a engine. This is a four cylinder gas engine. I am not sure if the head is interchangeable with any other models? My engine is out of a 1986 bayliner. I had an exhaust..

How Bad is a Cracked Exhaust Manifold? - Would be very grateful for insight/experience with the following -- Found about a 2" crack in port-side exhaust manifold on '84 Wellcraft (200 elite 260HP merc Runs horizontal, center, sort of low. Little bit of rust, water seepage. Evidently been t...

OMC 4.3L Strbrd Exhaust Manifold needed #984222 - Started leaking last year. This spring, after starting my boat the leak is worse. I had no problem taking the old one off, I just can't find a new or used one. If anyone knows where I can get this part, please post or let me know. Thanks
   Boating Forums (Home) -> Boat General Discussion All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]