Welcome to BoatingForumz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Tech Question

  
   Boating Forums (Home) -> Jet Ski RSS
Next:  Polaris 780 Recall?  
Author Message
Aluckyguess

External


Since: Jul 17, 2003
Posts: 5



(Msg. 1) Posted: Thu Jul 17, 2003 6:27 am
Post subject: Tech Question
Archived from groups: rec>sport>jetski (more info?)
I guess this had to happen to someone else. I have 98 XPL and the bearing on
the drive shaft seized. Well that's no big deal but it busted the part in
the hull that the hose clamps on to. Anyhow went and looked in the parts
manual and there is no part # for it.
Any ideas anyone?
A little grease would of saved a big head ache

Kevin Andrews

 >> Stay informed about: Tech Question 
Back to top
Login to vote
Aluckyguess

External


Since: Jul 17, 2003
Posts: 5



(Msg. 2) Posted: Thu Jul 17, 2003 6:51 am
Post subject: Re: Tech Question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Found the part in the Hull diagram. Now got to go fiqure how to get it out.
"Aluckyguess" wrote in message

 > I guess this had to happen to someone else. I have 98 XPL and the bearing
on
 > the drive shaft seized. Well that's no big deal but it busted the part in
 > the hull that the hose clamps on to. Anyhow went and looked in the parts
 > manual and there is no part # for it.
 > Any ideas anyone?
 > A little grease would of saved a big head ache
 >
 > Kevin Andrews
 >
 >

 >> Stay informed about: Tech Question 
Back to top
Login to vote
Jim R.

External


Since: Jun 25, 2003
Posts: 100



(Msg. 3) Posted: Thu Jul 17, 2003 7:15 am
Post subject: Re: Tech Question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Is this THE Kevin Andrews, friend to Mighty Mark Trent?

Jim R.


"Aluckyguess" wrote in message

 > I guess this had to happen to someone else. I have 98 XPL and the bearing
on
 > the drive shaft seized. Well that's no big deal but it busted the part in
 > the hull that the hose clamps on to. Anyhow went and looked in the parts
 > manual and there is no part # for it.
 > Any ideas anyone?
 > A little grease would of saved a big head ache
 >
 > Kevin Andrews
 >
 >
 >
 >> Stay informed about: Tech Question 
Back to top
Login to vote
David B. Thomas Jr

External


Since: Jun 23, 2003
Posts: 46



(Msg. 4) Posted: Thu Jul 17, 2003 10:10 am
Post subject: Re: Tech Question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Kevin,
It is item #3 on this fiche
<a rel="nofollow" style='text-decoration: none;' href="http://216.37.204.202/Seadoo_OEM/Seadoo_PWC.asp?Type=13&A=70&B=11" target="_blank">http://216.37.204.202/Seadoo_OEM/Seadoo_PWC.asp?Type=13&A=70&B=11</a>
You have to cut out the old tunnel section with an air grinder and epoxy
the new part in. MarineTex is a good epoxy to use.
Dave

Aluckyguess wrote:
 > I guess this had to happen to someone else. I have 98 XPL and the bearing on
 > the drive shaft seized. Well that's no big deal but it busted the part in
 > the hull that the hose clamps on to. Anyhow went and looked in the parts
 > manual and there is no part # for it.
 > Any ideas anyone?
 > A little grease would of saved a big head ache
 >
 > Kevin Andrews
 >
 >


--
David B. Thomas Jr
Blew-By-You PWC Services
93-A Pine Burr Rd Lumberton, MS 39455
(601) 796-2033 <a rel="nofollow" style='text-decoration: none;' href="http://www.blewbyyou.com" target="_blank">http://www.blewbyyou.com</a> or <a rel="nofollow" style='text-decoration: none;' href="http://www.blewbyyou.net" target="_blank">http://www.blewbyyou.net</a>
 >> Stay informed about: Tech Question 
Back to top
Login to vote
JetSki983

External


Since: Jun 22, 2003
Posts: 52



(Msg. 5) Posted: Thu Jul 17, 2003 2:59 pm
Post subject: Re: Tech Question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
SeaDoo sells a bronze repair part for this. You cut the fiberglass piece off
with a hacksaw and Epoxy in the bronze piece. This type of failure was common
on SeaDoos early boats that had the seal carrier with the bearings. I have
purchased this piece from Beesleys Point SeaDoo in New Jersey. I'm sure they
can help you out with either a part number or by shipping you the part. Speak
to Tom Innocente.. (609) 390-1113
 >> Stay informed about: Tech Question 
Back to top
Login to vote
Aluckyguess

External


Since: Jul 17, 2003
Posts: 5



(Msg. 6) Posted: Fri Jul 18, 2003 4:54 am
Post subject: Re: Tech Question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Yes sir.
"Jim R." wrote in message

 > Is this THE Kevin Andrews, friend to Mighty Mark Trent?
 >
 > Jim R.
 >
 >


  > > I guess this had to happen to someone else. I have 98 XPL and the
bearing
 > on
  > > the drive shaft seized. Well that's no big deal but it busted the part
in
  > > the hull that the hose clamps on to. Anyhow went and looked in the parts
  > > manual and there is no part # for it.
  > > Any ideas anyone?
  > > A little grease would of saved a big head ache
  > >
  > > Kevin Andrews
  > >
  > >
  > >
 >
 >
 >
 >> Stay informed about: Tech Question 
Back to top
Login to vote
Aluckyguess

External


Since: Jul 17, 2003
Posts: 5



(Msg. 7) Posted: Fri Jul 18, 2003 4:55 am
Post subject: Re: Tech Question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Thanks
"JetSki983" wrote in message

 > SeaDoo sells a bronze repair part for this. You cut the fiberglass piece
off
 > with a hacksaw and Epoxy in the bronze piece. This type of failure was
common
 > on SeaDoos early boats that had the seal carrier with the bearings. I have
 > purchased this piece from Beesleys Point SeaDoo in New Jersey. I'm sure
they
 > can help you out with either a part number or by shipping you the part.
Speak
 > to Tom Innocente.. (609) 390-1113
 >> Stay informed about: Tech Question 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Gtx 4 Tech Lube Question - Can anyone help locate the lube points which are mentioned in the owners manual, they require annual inspection and lube. Do I have to take off the rear drive and cover to access this? Thanks for any help you can offer.

Polaris Tech Question....SLT780 - OK, I just installed an SBT motor in my 96 Polaris. While breaking it in, I noticed increased vibration, mainly while trolling through no-wake zones. There is no excess vibration at idle or at speed, just while trolling at around 5 mph. The vibration is...

TECH: SEA DOO POWER PROBLEM - WHEN I'M AT FULL THROTTLE ON PLANE, I WILL SOMETIMES LOOSE THROTTLE POWER FOR A SECOND THEN IT GOES BACK TO FULL THROTTLE AGAIN.IS THE FUEL NOT GETTING INTO THE CARB FOR A SECOND? ANY IDEA WHAT THIS COULD BE? PLEASE EMAIL ME AT BRANX@PRODIGY.NET IF YOU..

Tech questions: 93 Polaris SL 650 - Problem: Motor bogs down after just 5-6 secs WOT. Poor idle. Hard to spool up, dbogs vs go to WOT 8/9 times out of 10 when initially giving it throttle. Believe it or not, this is after a dealer tune up - but no test drive....compression, ignition etc...

AD: Jet Tech Sports items on Ebay - Gentlemen, Inevitably for many of you the end of the season is here again. As a full-time PWC establishment we view it as a "slower" time. Given that, as we always do this time of year we are going to list many individual items on EBAY. If thr...
   Boating Forums (Home) -> Jet Ski All times are: Pacific Time (US & Canada)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]