Welcome to BoatingForumz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Teak oil that lasts?

 
   Boating Forums (Home) -> Boat Building RSS
Next:  repairing a fiberglass canoe  
Author Message
sherwindu

External


Since: Apr 04, 2005
Posts: 97



(Msg. 1) Posted: Tue Jun 13, 2006 11:41 pm
Post subject: Teak oil that lasts?
Archived from groups: rec>boats>building (more info?)

I have tried various teak oil products, and although they look good immediately
after
application, a week later they appear to be gone. This is for a boat moored on
a port on Lake Michigan.

Sherwin D.

 >> Stay informed about: Teak oil that lasts? 
Back to top
Login to vote
Ron Magen

External


Since: Oct 27, 2005
Posts: 44



(Msg. 2) Posted: Wed Jun 14, 2006 12:37 pm
Post subject: Re: Teak oil that lasts? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Sherwin,
'Teak Oil' by it's very nature is fugitive. That is it DOES 'disappear . . .
by absorption and evaporation. However, if it is truly within a week and you
are experiencing the same result with several reputable products, your
problem is relatively simple. You aren't using enough !!

Some of the *really cheap* stuff is only a bit of oil diluted by a LOT of
Kerosene. I use some fairly inexpensive stuff myself - typically the West
Marine 'house brand' or 'SeaBrite' {?} bought on sale - and have no problems
on Teak or Mahogany trim. Or even Lauan ply thwarts. The 'trick' is to
follow the directions on the bottle - usually to initially apply 'to
saturation'. MY particular technique it to use a 'chip brush' as an
applicator. Once the wood is 'cleaned & prepped', I pour a quantity into a
small container and flow it on like varnish. As it is absorbed {sometimes
almost instantaneously}I apply more. When it starts to 'pool' I stop and
leave it for an hour or so. If it has been absorbed I add more, if not I
wipe off the surplus and wait 24-hours or so.

Then another coat is WIPED on. If absorbed the wiping application is
repeated, if not the residual is wiped off and the job is done. Another WIPE
application is applied WHEN the wood looks like it needs 'refreshing'. This
is up to YOUR 'sensibilities', environment, and type of usage. It may be
annually, bi-annually, or every couple of months. Or weekly if you just
'like to do it'.

Regards & Good Luck,
Ron Magen
Backyard Boatshop

"sherwindu" wrote in message

> I have tried various teak oil products, and although they look good
immediately
> after
> application, a week later they appear to be gone. This is for a boat
moored on
> a port on Lake Michigan.
>
> Sherwin D.
>

 >> Stay informed about: Teak oil that lasts? 
Back to top
Login to vote
Christian Brink

External


Since: Jun 10, 2006
Posts: 2



(Msg. 3) Posted: Wed Jun 14, 2006 2:00 pm
Post subject: Re: Teak oil that lasts? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

sherwindu wrote:
> I have tried various teak oil products, and although they look good immediately
> after
> application, a week later they appear to be gone. This is for a boat moored on
> a port on Lake Michigan.
>
> Sherwin D.
>

A teak oil will do that, but that does seem too quick.

The only finish that last, stick, and build up on oily woods like teak,
rosewood and cocobolo is Cyanoacrylate(CA) (don't use actual Superglue
it's too thin).

You can google 'CA wood finish' for the procedure. I have not used it on
a boat, but I have been using is for fishing gear (reel seats, and
grips), and wood fishing nets for a couple of years. It's fairly easy to
learn how to apply it as a wood finish.

One warning - it builds quickly and has a thick glossy polyurethane
look. So if you do not like that look do not use it.

Christian
 >> Stay informed about: Teak oil that lasts? 
Back to top
Login to vote
david

External


Since: Jun 26, 2006
Posts: 1



(Msg. 4) Posted: Mon Jun 26, 2006 1:30 pm
Post subject: Re: Teak oil that lasts? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

>
> The only finish that last, stick, and build up on oily woods like teak,
> rosewood and cocobolo is Cyanoacrylate(CA) (don't use actual Superglue
> it's too thin).
>
> You can google 'CA wood finish' for the procedure. I have not used it on
> a boat, but I have been using is for fishing gear (reel seats, and
> grips), and wood fishing nets for a couple of years. It's fairly easy to
> learn how to apply it as a wood finish.
>
> One warning - it builds quickly and has a thick glossy polyurethane
> look. So if you do not like that look do not use it.
>
> Christian

Hello Christian

Just found your contribution in a search as i am in similar process.
First point is CA is super glue, comes in thin, med and thick. I have
used the thin to penetrate some rotten wood in my sailing dinghy and as
a woodworker for 25 years have to recommend Danish oil instead of Teak.
Whatever is used though an oil finish needs a few coats, i thin mine
1:1 with spirit and regular doses after for integrity, but is still
better than the thick laquers which predominate.

David
 >> Stay informed about: Teak oil that lasts? 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Ipe vs. Teak - I'm thinking of using Ipe in place of teak to rebuild the bow sprit on a Pearson 365. Anyone know if the Ipe is as rot resistant to decay as teak is????

Teak Oil or varnish - Well , it's not a building boat question but I believe that you can help me , if you can spend some time for me I have a wooden speargun made by iroko wood and I don't know what to do. Brush it by teak oil or brush it by varnish. I want the piece of woo...

Teak Finish - This has probably been discussed a million times, but it's the middle of winter and there's more time to waste now. Anyway, for interior teak, would a urethane finish such as a Minwax product be alright? I've had good success with it on certain..

Painting Teak - I have teak window frames on my trawler that have peeling varnish that I would like to strip and paint white. I had read somewhere that its a good idea to put a base of varnish on the bare wood to seal it from the paint in case in the future, someone els...

Brazilian Teak - Is Brazilian teak as good as the stuff from S.E Asia?
   Boating Forums (Home) -> Boat Building All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]