Sea Doo 587 Stuck Flywheel

I'm trying to remove the flywheel from my core 587 to put on the new
one I ordered from SBT. I removed the nut as directed without any
problem, and then tried a pulley puller to remove the flywheel. I even
struck the enter shaft of the puller as directed.

So far I've succeeded in bending the heads of the bolts and stripping
one out of the flywheel.

Any ideas?

 >
 >I'm trying to remove the flywheel from my core 587 to put on the new
 >one I ordered from SBT. I removed the nut as directed without any
 >problem, and then tried a pulley puller to remove the flywheel. I even
 >struck the enter shaft of the puller as directed.
 >
 >So far I've succeeded in bending the heads of the bolts and stripping
 >one out of the flywheel.
 >
 >Any ideas?
 >
 >
 >
 >
 >
 >

If you did that then you did not have the bolts seated in flywheel enough or
your puller is not very good. take it to a dealer & they will pull it for you.
should charge you much as you have it ready to pull.<!-- ~MESSAGE_AFTER~ -->