Welcome to BoatingForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Repairing double diagonal

  
   Boating Forums (Home) -> Boat Building RSS
Related Topics:
repairing PVC inflatable - Hey all, Any info on cleaning and glueing patches on PVC Thanks, MMC.

double hull wth rot! - Help! I have run across an lovely 1954 Sparkman and Stephens 39ft hull. Its one major problem is rot amidships from the shear to 5 planks down. The owner has tried to minimize the damage, but has deferred this too long. I am afraid..

Repairing cracked rudder, continued - A month ago I posted a note about repairing my cracked mahogany rudder. It was suggested that I let epoxy draw into the crack; drilling some small holes and heating it first to it. Someone was even kind enough to send me some very light..

Repairing a daggerboard - My 13' sailboat has a mahogany There is a crack in it, running about 1/3rd of the length, about 1" from the trailing edge. It does not affect anything, but I am concerned it will crack further and break off; so I am hoping to stabilize it to..

Steel Boat Double Ended Transon Hung Rudder Conversion - Can anyone point me to any of double ended yachts, that have wheel steering I want to convert my Gypsy Rover from tiller to wheel I have something rigged up already but its a big so I am looking for..
Next:  Geodesic Airolite Boat with a twist  
Author Message
John14

External


Since: Oct 30, 2003
Posts: 10



(Msg. 1) Posted: Sat May 01, 2004 5:36 pm
Post subject: Repairing double diagonal
Archived from groups: rec>boats>building (more info?)
hi
I have a cabin boat, built with double diagonal strips - New Zealand
Kauir.
Some of the strip has delaminated, if you press them you see they have
'bubbled' a few mm
Does anyone have the process for repairing these delaminations?

Thanks
John.TakeThisOut@myplace.co.nz

 >> Stay informed about: Repairing double diagonal 
Back to top
Login to vote
iso-8859-1qMartin_

External


Since: May 08, 2004
Posts: 4



(Msg. 2) Posted: Sat May 01, 2004 5:36 pm
Post subject: Re: Repairing double diagonal [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Sat, 01 May 2004 14:36:15 +1200, John wrote:

 > hi
 > I have a cabin boat, built with double diagonal strips - New Zealand
 > Kauir.
 > Some of the strip has delaminated, if you press them you see they have
 > 'bubbled' a few mm
 > Does anyone have the process for repairing these delaminations?
 >
Puncture all 'bubbles', inject epoxy, staple down, wait until the
epoxy has cured.

--
====================================================================
Martin Schöön                    "Problems worthy of attack
                                     prove their worth by hitting back"
                                                              Piet Hein
====================================================================<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Repairing double diagonal 
Back to top
Login to vote
Display posts from previous:   
   Boating Forums (Home) -> Boat Building All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]