KVH Azimuth Fluxgate Compass Remote sensor

FAQ

Profile

KVH Azimuth Fluxgate Compass Remote sensor

Boating Forums (Home) -> Boat Electronics

Next: Yo - JohnH!!

Author

Message

External

Since: Jul 12, 2007
Posts: 11

(Msg. 1) Posted: Sat Nov 10, 2007 4:48 am Post subject: KVH Azimuth Fluxgate Compass Remote sensor Archived from groups: rec>boats>electronics (more info?)

I have a KVH Azimuth fluxgate compass with a remote sensor, which is currently mounted in a steel vessel. Despite this, accuracy is reasonable. I would like to improve accuracy by mounting the remote sensor externally on the wooden wheelhouse structure. The KVH sensor is both large and not waterproof. There are small waterproof sensors around but the most common available are Raymarine sensors. These I think have a SeaTalk output which will need converting to NMEA 0183, which would then be accepted by the KVH head. Grateful if anyone can confirm?? TVMIA >> Stay informed about: KVH Azimuth Fluxgate Compass Remote sensor

Display posts from previous:

Related Topics:

Which fluxgate compass and rudder sensor for Raymarine mod.. - I purchased a Raymarine model 100 autopilot. I now need to purchase the compass and rudder sensor. How do I identify the correct items to purchase? Are there particular model or part numbers that I should look for or stay away from? Doug

Fluxgate calibration problems - Hi Group I have been out today and have attempted to do a sea trial calibration of my raymarine fluxgate and s6001 auto, I could get the system to calibrate after following the setup guides and doing lots of very slow speed revolutions. Only when i..

rudder sensor ST4000 - I have just fitted a rudder sensor to a Raymarine ST4000 wheel pilot. It hasn't made the slightest difference. I don't think the control unit has 'seen' the new sensor. Is there a test procedure before I have to bend myself double for an hour trying to....

Depth FInder Sensor - Hello all, so as oppossed to drilling a hole in my hull for a depth finder sensor, I should be able to set it up inside the hull as long as the sensor is in some type of liquid right? IT will be able to tell depths through the fiberglass hull right? ..

Ultrasonic wind sensor + Raymarine ST-60 - Has anyone tried connecting the Airmar PB100 to a Raymarine ST-60? I'm wondering if the ST-60 will pick up the NMEA 0183 sentences from the Airmar and function as if it were connected to a standard wind vane or whether it actually needs the wind vane..

	Boating Forums (Home) -> Boat Electronics	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum