Welcome to BoatingForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

Icom M-601 connectors?

  
   Boating Forums (Home) -> Boat Electronics RSS
Related Topics:
ICOM M800 cable to remote - Recent e-bay M800 purchase without cable to connect to remote ICOM does not support this cable. Any leads as to a source? Are available for Can this cable be converted to hard..

Autohelm 3000 connectors? - Hi, I have an old Autohelm 3000 which works great, but the locking ring for the drive motor connector broke off and has Has anyone out there had this problem, and if so, where did you get a Thanks.

FS ICOM M-700 Marine Single Sideband Radio South Florida - Mint ICOM M-700 marine single sideband radio, 150 watts transmit. Looks and works great. Includes operating manual, wiring harness, mount, other and service manual (on cd rom). Contact hanks424 at $450 plus actual shipping

ICOM M602 VHF Radio - Would like to hear your thougths about the ICOM M602 VHF radio!

Connecting Icom M502 to serial GPS unit - Hello all, A week ago I bought myself an Icom M502. I already have an external GPS unit which has a standard serial 9 pins Does anybody know which serial pins I use to connect to the NMEA in on the Icom? Thanks, Ronald.
Author Message
Mika the Spamkiller

External


Since: Sep 26, 2005
Posts: 2



(Msg. 1) Posted: Mon Sep 26, 2005 8:59 pm
Post subject: Icom M-601 connectors?
Archived from groups: rec>boats>electronics (more info?)
Making cable for connecting my GPS to Icom M-601 radio. Icom manual
shows pins for data in and out, external speaker etc. Unlike with
computer connectors, pins seem not be numbered, so there is some
confusion. I am unsure whether the picture in the manual is of the
connector on back side of the radio or cable. Wrong quess, and my
GPS data output will be connected to external speaker output of the
radio... Anyone with some info?

Mika

 >> Stay informed about: Icom M-601 connectors? 
Back to top
Login to vote
TomS

External


Since: May 03, 2005
Posts: 19



(Msg. 2) Posted: Mon Sep 26, 2005 9:18 pm
Post subject: Re: Icom M-601 connectors? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
The picture in the manual shows the solder side of the connector.

Regards,
TomS

"Mika the Spamkiller" <acenospam2002 DeleteThis @nic.fi> wrote in message
news:38dgj1to168f83rn15u1fmfa2721dtunhl@4ax.com...
>
> Making cable for connecting my GPS to Icom M-601 radio. Icom manual
> shows pins for data in and out, external speaker etc. Unlike with
> computer connectors, pins seem not be numbered, so there is some
> confusion. I am unsure whether the picture in the manual is of the
> connector on back side of the radio or cable. Wrong quess, and my
> GPS data output will be connected to external speaker output of the
> radio... Anyone with some info?
>
> Mika
>
>
>

 >> Stay informed about: Icom M-601 connectors? 
Back to top
Login to vote
Mika the Spamkiller

External


Since: Sep 26, 2005
Posts: 2



(Msg. 3) Posted: Mon Sep 26, 2005 10:19 pm
Post subject: Re: Icom M-601 connectors? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Mon, 26 Sep 2005 21:18:02 +0300, "TomS" <a.RemoveThis@b.com> wrote:

>The picture in the manual shows the solder side of the connector.

Thanks for info. Maybe I just didnīt read the manual carefully.

Mika
 >> Stay informed about: Icom M-601 connectors? 
Back to top
Login to vote
Display posts from previous:   
   Boating Forums (Home) -> Boat Electronics All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]