Welcome to BoatingForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

ICOM M802 SSB - Channel Guide

  
   Boating Forums (Home) -> Boat Electronics RSS
Related Topics:
ICOM-M802 SSB - I'm looking at SSB for my boat the ICOM-M802 has two RF conectors one to the Autotuner and the other for DSC Receive. If i opt to only use one antenna for thr Autotuner AT-140. Will i be able to use the DSC function of my radio? if so with what..

AIS & Icom IC-M1 - We are in Singapore waters at the moment and AIS would be great. The handheld Icom IC-M1 has a defective transmit section (told by but will receive well. An AIS website details the mods required to change many VHF radios to receive raw AIS data..

Icom 802 and SGC Smarttuner - Does anyone know if an Icom 802 SSB can be used with a SGC SG-30

Mic trouble with Icom 710 SSB - Hi all, We have an Icom 710RT SSB on our catamaran (now in and haave been having some strange behaviour from the Mic recently. When I release the Tx button on the mic after the radio will sometimes (30%) downshift to the next..

Icom M-601 connectors? - Making cable for my GPS to Icom M-601 radio. Icom manual shows pins for data in and out, external speaker etc. Unlike with computer pins seem not be numbered, so there is some I am unsure whether the picture in the..
Next:  Boat Electronics: SeaTalk NG (New Generation)  
Author Message
ned

External


Since: Mar 05, 2008
Posts: 3



(Msg. 1) Posted: Wed Mar 05, 2008 12:31 pm
Post subject: ICOM M802 SSB - Channel Guide
Archived from groups: rec>boats>electronics (more info?)
Can anyone advise how I might obtain a Channel Guide for this radio?
ICOM's site does not have it for downloading. Thanks. Ned

 >> Stay informed about: ICOM M802 SSB - Channel Guide 
Back to top
Login to vote
Larry

External


Since: Nov 05, 2005
Posts: 1286



(Msg. 2) Posted: Wed Mar 05, 2008 10:52 pm
Post subject: Re: ICOM M802 SSB - Channel Guide [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
ned <ngatewd.DeleteThis@ksu.edu> wrote in news:8a8c74bc-8c90-46c5-b1b3-a35d6e966870@
34g2000hsz.googlegroups.com:

> Can anyone advise how I might obtain a Channel Guide for this radio?
> ICOM's site does not have it for downloading. Thanks. Ned
>
>

Do you mean what marine channels does it support?

http://www.icomamerica.com/en/downloads/DownloadDetails.aspx?Document=103

Look on Acrobat's page 4 of the manual downloaded from here. The channels
and groups it comes preprogrammed with are on that page to answer your
question.

But, alas, you can add any frequency (simplex) or frequency pair (duplex)
you like by following the directions in the manual.

To open up the transmitter so it will transmit on ANY frequency from 2-30
Mhz, simply hold down the MODE and TX buttons with the M800 powered off,
then, while holding these buttons down, turn it on and it will toggle into
full width transmit mode. To put it back into marine channels ONLY just
repeat the procedure. I use it for ham radio when I'm aboard (W4CSC) but
always turn full transmit off again before leaving the boat so my captain
doesn't end up in trouble calling out on a BBC channel I've also programmed
into user memories for him to listen to BBC back home....

 >> Stay informed about: ICOM M802 SSB - Channel Guide 
Back to top
Login to vote
Al Thomason

External


Since: Sep 09, 2005
Posts: 22



(Msg. 3) Posted: Thu Mar 06, 2008 12:34 am
Post subject: Re: ICOM M802 SSB - Channel Guide - InternatVoiceChanDesign.pdf (0/1) [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
ICOM use to have an excellent SSB guide on their web site, but I can
no longer find it. I was however able to find a copy here:
http://www.pearson40.org/single_sideband.htm

If you look at Chapter 16, it gives an overview of channels. However,
this site is missing the original appendix which listed channels and
frequencies. I have attached that .pdf file here.

-al-


On Wed, 5 Mar 2008 12:31:37 -0800 (PST), ned <ngatewd RemoveThis @ksu.edu> wrote:

>Can anyone advise how I might obtain a Channel Guide for this radio?
>ICOM's site does not have it for downloading. Thanks. Ned
 >> Stay informed about: ICOM M802 SSB - Channel Guide 
Back to top
Login to vote
ned

External


Since: Mar 05, 2008
Posts: 3



(Msg. 4) Posted: Mon Mar 10, 2008 2:09 pm
Post subject: Re: ICOM M802 SSB - Channel Guide [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Mar 5, 5:52 pm, Larry <no....DeleteThis@home.com> wrote:
> ned <ngat....DeleteThis@ksu.edu> wrote in news:8a8c74bc-8c90-46c5-b1b3-a35d6e966870@
> 34g2000hsz.googlegroups.com:
>
> > Can anyone advise how I might obtain a Channel Guide for this radio?
> > ICOM's site does not have it for downloading. Thanks. Ned
>
> Do you mean what marine channels does it support?
>
> http://www.icomamerica.com/en/downloads/DownloadDetails.aspx?Document...
>
> Look on Acrobat's page 4 of the manual downloaded from here. The channels
> and groups it comes preprogrammed with are on that page to answer your
> question.
>
> But, alas, you can add any frequency (simplex) or frequency pair (duplex)
> you like by following the directions in the manual.
>
> To open up the transmitter so it will transmit on ANY frequency from 2-30
> Mhz, simply hold down the MODE and TX buttons with the M800 powered off,
> then, while holding these buttons down, turn it on and it will toggle into
> full width transmit mode. To put it back into marine channels ONLY just
> repeat the procedure. I use it for ham radio when I'm aboard (W4CSC) but
> always turn full transmit off again before leaving the boat so my captain
> doesn't end up in trouble calling out on a BBC channel I've also programmed
> into user memories for him to listen to BBC back home....

Thanks, Larry. That's an informative site. --- Ned
 >> Stay informed about: ICOM M802 SSB - Channel Guide 
Back to top
Login to vote
ned

External


Since: Mar 05, 2008
Posts: 3



(Msg. 5) Posted: Mon Mar 10, 2008 2:11 pm
Post subject: Re: ICOM M802 SSB - Channel Guide - InternatVoiceChanDesign.pdf (0/1) [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Mar 5, 7:34 pm, Al Thomason <al_thoma....TakeThisOut@iname.com> wrote:
> ICOM use to have an excellent SSB guide on their web site, but I can
> no longer find it. I was however able to find a copy here:http://www.pearson40.org/single_sideband.htm
>
> If you look at Chapter 16, it gives an overview of channels. However,
> this site is missing the original appendix which listed channels and
> frequencies. I have attached that .pdf file here.
>
> -al-
>
> On Wed, 5 Mar 2008 12:31:37 -0800 (PST), ned <ngat....TakeThisOut@ksu.edu> wrote:
> >Can anyone advise how I might obtain a Channel Guide for this radio?
> >ICOM's site does not have it for downloading. Thanks. Ned

Thanks, Al. --- Ned
 >> Stay informed about: ICOM M802 SSB - Channel Guide 
Back to top
Login to vote
Display posts from previous:   
   Boating Forums (Home) -> Boat Electronics All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]