Welcome to BoatingForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Need Help trobleshooting 1989 40hp Merc

 
   Boating Forums (Home) -> Boat General Discussion RSS
Next:  Salt Shaker Information  
Author Message
jeff_reeder

External


Since: Oct 13, 2003
Posts: 1



(Msg. 1) Posted: Mon Oct 13, 2003 8:32 am
Post subject: Need Help trobleshooting 1989 40hp Merc
Archived from groups: rec>boats (more info?)

I was out on the lake this weekend and my 1989 40hp Merc tiller was
running rougher than a ever, lots of smoke and oil film on the water.
It was a no wake lake, so not a lot of RPM's through the day. Upon
taking the boat out of the water I noticed a frothy (brownish) oil and
water mixture leaking out of the exhaust ports and the water ports.
Any ideas?

Thanks much,
The Fishing Musician

 >> Stay informed about: Need Help trobleshooting 1989 40hp Merc 
Back to top
Login to vote
gfretwell

External


Since: Aug 31, 2003
Posts: 91



(Msg. 2) Posted: Mon Oct 13, 2003 5:12 pm
Post subject: Re: Need Help trobleshooting 1989 40hp Merc [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

 >Upon
 >taking the boat out of the water I noticed a frothy (brownish) oil and
 >water mixture leaking out of the exhaust ports and the water ports.
 >Any ideas?

Two ideas,
Water in the gas
Leaking water jacket<less likely>
I suppose it could just be a weak cylinder, misfiring for all the usual
reasons, filling the exhaust channel with unburned fuel.

Start with the garden variety tuneup, plugs, compression, timing, carbs etc.<!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Need Help trobleshooting 1989 40hp Merc 
Back to top
Login to vote
Clams Canino

External


Since: Dec 02, 2003
Posts: 252



(Msg. 3) Posted: Mon Oct 13, 2003 5:50 pm
Post subject: Re: Need Help trobleshooting 1989 40hp Merc [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

The best news is that it could have just been loading up from all the
trolling. Sometimes the exhaust water mixes with the exhaust oil and makes
that brown mung.

Past that I'd say you have a water leak at the exhaust divider.

-W

"Gfretwell" <gfretwell RemoveThis @aol.comGreg> wrote in message
news:20031013121257.24972.00000316@mb-m17.aol.com...
  > >Upon
  > >taking the boat out of the water I noticed a frothy (brownish) oil and
  > >water mixture leaking out of the exhaust ports and the water ports.
  > >Any ideas?
 >
 > Two ideas,
 > Water in the gas
 > Leaking water jacket<less likely>
 > I suppose it could just be a weak cylinder, misfiring for all the usual
 > reasons, filling the exhaust channel with unburned fuel.
 >
 > Start with the garden variety tuneup, plugs, compression, timing, carbs
etc.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Need Help trobleshooting 1989 40hp Merc 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Does anyone know how to adjust the idle speed on a Merc 40.. - Greetings, How do you adjust the idle speed on a Merc 40HP, 2 cylinder, 2-stroke? I adjusted the cable via the barrel nut, but it made no difference in the idle speed... There's a threaded rod above the linkage, but I don't want to fiddle with anything...

1989 Johnson 88SPL Does not pee at high RPM - It all started when it first overheated. I believe that something clogged the intake while leaving a grass flat. The engine overheated to the point it shut down. This motor only had 12 hours on the rebuild and the paint was burnt on parts of the motor...

1989 Force 50 Slipping Hub On New Quicksilver Prop - Morning, I installed a new Quicksilver 10 3/8" x 12 1/2" propeller yesterday and gave it a test drive. It ran perfect all afternoon. After heading back to the dock on a 30 minute straight run at about 85% throttle ( 4800 rpms) we stopped ...

Honda 40hp...2003 vs. 2004 - My dealer is trying to sell me a brand new 2003 40hp Honda and he said it's almost exactly the same as the 2004's. He said they changed a few stickers and that's about it. Is he telling the truth?

76 Mariner 40hp question - A buddy of mine call me today and said they had a 76 Mariner 40hp that they replaced the water pump impeller. The problem them have is that can't get it to shift now that it is back togather. It seems to run fine and pumps wter ok. But the shifter is....
   Boating Forums (Home) -> Boat General Discussion All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]