Help needed: Humminbird Matrix 10 Fishfinder

External Since: Dec 12, 2004 Posts: 3

Hi Everyone,

I need some help with my fishfinder, I upgraded the firmware with version
2.480 (got it from Humminbird web site) and it is now not able to start.

When I press the power buttom, the startup screen show for about 2 second
and then it goes into the normal mode and then it will power off
automatically.

With the menu button, I can goes into normal, simulation, system status and
pc connection and that it.

I'm thinking there might be some key sequence will restore the system to
default or if someone can provide me with a older version of the firmware.

Thanks alot.
HH

External Since: Jan 05, 2005 Posts: 221

On Mon, 9 May 2005 22:27:41 -0400, "HHO"
<_NO_S_P_A_Mhermanh.DeleteThis@hotmail_NO_SPAM.com> wrote:

~~ snippage ~~

>I'm thinking there might be some key sequence will restore the system to
>default or if someone can provide me with a older version of the firmware.

Whoopsie. Try reloading the firmware first - there might have been a
glitch in the transfer.

If that doesn't work, then find the system screen while it's on and
see if you can get to the restore default button.

If not, then call Humminbird and bitch like hell. I'm sure there is a
button sequence to set system defaults, but I can't find it on the
web. While you are at it, you might want to tell them what happened
and see if it's a fault in the upgrade.

Good luck.

Later,

Tom