 |
|
|
|
Next: Catalog Available: RF Connectors, Adapters & ..
|
| Author |
Message |
External
Since: May 10, 2005
Posts: 112
|
(Msg. 1) Posted: Fri Mar 10, 2006 1:58 pm
Post subject: Garmin Gps/Plotters already supporting AIS?
Archived from groups: rec>boats>electronics (more info?)
|
|
|
The information below was taken from the SeaCAS AIS Receiver Home Page:
Navigation Software that is compatible with SEACAS SafePassage AIS
The CAPN
Fugawi Marine ENC
Nobeltec Admiral
Rosepoint Navigation Coastal Explorer
MaxSea Navigator+ Commander Explorer Professional
Digiboat's Software on Board (SOB)
GPSNavX & MacENC
Euronav seaPro UAIS
ICAN Regulus Aldebaran
Chartworx TheMap Yachting
Nobeltec VNS version 8.0
NavSim BOATCRUISER
Global Navigation's NavPak
Maptech Chart Navigator Pro
Transas Marine Navi-Sailor
Chart Plotters that are compatible with SEACAS SafePassage AIS
FURUNO NavNet vx2
SI-TEX ColorMax
Lorenz Electronics Excalibur World Map
SEIWA BARRACUDA NAUTILUS BARRAMUNDI
VDO Map Chart Plotters
JRC JMA-5300
Raymarine E-Series
Garmin GPSMAP 392, 398, 492, 498, 2206, 2210, 3205, 3206, 3210.
As can see above, these new models of Garmin marine gps/plotters is
said to support AIS. Any cooments?
Pascal |
|
| Back to top |
|
 | |
External
Since: Mar 21, 2006
Posts: 1
|
(Msg. 2) Posted: Tue Mar 21, 2006 9:33 am
Post subject: Re: Garmin Gps/Plotters already supporting AIS? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I spoke to Garmin Tech Support yesterday. According to the guy I spoke
with, the latest version of the Garmin 3010 software (3.5) does indeed
support both high speed NMEA and AIS sentences. My nobeltec AIS receiver
has just arrived and I'm headed down to the boat this weekend to try it all
out.
"Pascal" wrote in message
> The information below was taken from the SeaCAS AIS Receiver Home Page:
>
> Navigation Software that is compatible with SEACAS SafePassage AIS
> The CAPN
> Fugawi Marine ENC
> Nobeltec Admiral
> Rosepoint Navigation Coastal Explorer
> MaxSea Navigator+ Commander Explorer Professional
> Digiboat's Software on Board (SOB)
> GPSNavX & MacENC
> Euronav seaPro UAIS
> ICAN Regulus Aldebaran
> Chartworx TheMap Yachting
> Nobeltec VNS version 8.0
> NavSim BOATCRUISER
> Global Navigation's NavPak
> Maptech Chart Navigator Pro
> Transas Marine Navi-Sailor
>
>
> Chart Plotters that are compatible with SEACAS SafePassage AIS
> FURUNO NavNet vx2
> SI-TEX ColorMax
> Lorenz Electronics Excalibur World Map
> SEIWA BARRACUDA NAUTILUS BARRAMUNDI
> VDO Map Chart Plotters
> JRC JMA-5300
> Raymarine E-Series
> Garmin GPSMAP 392, 398, 492, 498, 2206, 2210, 3205, 3206, 3210.
>
> As can see above, these new models of Garmin marine gps/plotters is
> said to support AIS. Any cooments?
>
> Pascal
> |
|
| Back to top |
|
| |
External
Since: May 10, 2005
Posts: 112
|
(Msg. 3) Posted: Tue Mar 21, 2006 11:08 am
Post subject: Re: Garmin Gps/Plotters already supporting AIS? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
In the Garmin Web Site, the latest update from 3.4 to 3.5 for GpsMap
3010C shows as below:
Changes made from version 3.40 to 3.50:
Improved the retail demonstration mode.
Added NMEA output sentence for Autopilot B (GPAPB).
Optimized the NMEA transmit rate.
Corrected a problem with the route data/numbers list not updating
correctly when the route has 9 or more waypoints.
Corrected the position of the sun/moon on the celestial page when the
sky orientation was set to Track Up.
I do not se anithing about AIS. Anyway, I would like to know of your
experience in real.
Thanks
Pascal >> Stay informed about: Garmin Gps/Plotters already supporting AIS? |
|
| Back to top |
|
| |
External
Since: May 10, 2005
Posts: 112
|
(Msg. 4) Posted: Tue Mar 28, 2006 7:05 am
Post subject: Re: Garmin Gps/Plotters already supporting AIS? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Hi Brad,
You are rigth; I have donloaded today the updated mannuals of
GpsMap3005/3010/3205/498 and the AIS support is there.
It seems prety basic yet: there is a new option in the NMEA/IN/OUT for
High Speed (38400) and a AIS Tab in Map Page to select the zoom scale
to AIS targets appears. The mannual says it diplays MMSI, Ships
position, course and speed . I have not seen any option to alarms, but
seems that we can set the heading line of the sips (?) on time or
distance.
Can you posy here your tests rsults asap?
Thanks
Pascal >> Stay informed about: Garmin Gps/Plotters already supporting AIS? |
|
| Back to top |
|
| |
External
Since: Apr 19, 2006
Posts: 4
|
(Msg. 5) Posted: Wed Apr 19, 2006 10:34 am
Post subject: Re: Garmin Gps/Plotters already supporting AIS? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Pascal wrote:
> Hi Brad,
>
> You are rigth; I have donloaded today the updated mannuals of
> GpsMap3005/3010/3205/498 and the AIS support is there.
>
> It seems prety basic yet: there is a new option in the NMEA/IN/OUT for
> High Speed (38400) and a AIS Tab in Map Page to select the zoom scale
> to AIS targets appears. The mannual says it diplays MMSI, Ships
> position, course and speed . I have not seen any option to alarms, but
> seems that we can set the heading line of the sips (?) on time or
> distance.
>
> Can you posy here your tests rsults asap?
>
> Thanks
>
> Pascal
>
Sorry for the delay. First, I did confirm with Garmin that the release
notes that are published with their upgrades are sketchy at best.
Second, I was wrong about version numbers. It looks as AIS is supported
in v4.1 and above. I'm now running v4.2
I'm using the black box AIS receiver from Nobeltec (probably OEMed). I
have the whole thing hooked up, but so far I havent seen anything show
up on the display. My boat's not yet in the water, so it may just be
that nothing interesting has come in range.
My next step is to connect the output of the AIS box to the onboard
laptop's serial port and take a look at the data stream. It may be that
I have the box wired incorrectly, or that there is something wrong with
the box. At least with the laptop I can fire up hyperterminal and take
a look at the raw data.
I'll see what I find! >> Stay informed about: Garmin Gps/Plotters already supporting AIS? |
|
| Back to top |
|
| |
External
Since: Mar 06, 2006
Posts: 29
|
(Msg. 6) Posted: Wed Apr 19, 2006 6:31 pm
Post subject: Re: Garmin Gps/Plotters already supporting AIS? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
In article , brad
wrote:
> Pascal wrote:
> > Hi Brad,
> >
> > You are rigth; I have donloaded today the updated mannuals of
> > GpsMap3005/3010/3205/498 and the AIS support is there.
> >
> > It seems prety basic yet: there is a new option in the NMEA/IN/OUT for
> > High Speed (38400) and a AIS Tab in Map Page to select the zoom scale
> > to AIS targets appears. The mannual says it diplays MMSI, Ships
> > position, course and speed . I have not seen any option to alarms, but
> > seems that we can set the heading line of the sips (?) on time or
> > distance.
> >
> > Can you posy here your tests rsults asap?
> >
> > Thanks
> >
> > Pascal
> >
>
> Sorry for the delay. First, I did confirm with Garmin that the release
> notes that are published with their upgrades are sketchy at best.
> Second, I was wrong about version numbers. It looks as AIS is supported
> in v4.1 and above. I'm now running v4.2
>
> I'm using the black box AIS receiver from Nobeltec (probably OEMed). I
> have the whole thing hooked up, but so far I havent seen anything show
> up on the display. My boat's not yet in the water, so it may just be
> that nothing interesting has come in range.
>
> My next step is to connect the output of the AIS box to the onboard
> laptop's serial port and take a look at the data stream. It may be that
> I have the box wired incorrectly, or that there is something wrong with
> the box. At least with the laptop I can fire up hyperterminal and take
> a look at the raw data.
>
> I'll see what I find!
>
Maybe you should just listen to the appropriate frequencies and see
if you can actually heaer any of the transmissions, to determine if
your AIS receiver is actually hearing anything....... >> Stay informed about: Garmin Gps/Plotters already supporting AIS? |
|
| Back to top |
|
| |
External
Since: Apr 19, 2006
Posts: 4
|
(Msg. 7) Posted: Wed Apr 19, 2006 6:31 pm
Post subject: Re: Garmin Gps/Plotters already supporting AIS? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
You wrote:
> In article , brad
> wrote:
>
>> Pascal wrote:
>>> Hi Brad,
>>>
>>> You are rigth; I have donloaded today the updated mannuals of
>>> GpsMap3005/3010/3205/498 and the AIS support is there.
>>>
>>> It seems prety basic yet: there is a new option in the NMEA/IN/OUT for
>>> High Speed (38400) and a AIS Tab in Map Page to select the zoom scale
>>> to AIS targets appears. The mannual says it diplays MMSI, Ships
>>> position, course and speed . I have not seen any option to alarms, but
>>> seems that we can set the heading line of the sips (?) on time or
>>> distance.
>>>
>>> Can you posy here your tests rsults asap?
>>>
>>> Thanks
>>>
>>> Pascal
>>>
>> Sorry for the delay. First, I did confirm with Garmin that the release
>> notes that are published with their upgrades are sketchy at best.
>> Second, I was wrong about version numbers. It looks as AIS is supported
>> in v4.1 and above. I'm now running v4.2
>>
>> I'm using the black box AIS receiver from Nobeltec (probably OEMed). I
>> have the whole thing hooked up, but so far I havent seen anything show
>> up on the display. My boat's not yet in the water, so it may just be
>> that nothing interesting has come in range.
>>
>> My next step is to connect the output of the AIS box to the onboard
>> laptop's serial port and take a look at the data stream. It may be that
>> I have the box wired incorrectly, or that there is something wrong with
>> the box. At least with the laptop I can fire up hyperterminal and take
>> a look at the raw data.
>>
>> I'll see what I find!
>>
>
> Maybe you should just listen to the appropriate frequencies and see
> if you can actually heaer any of the transmissions, to determine if
> your AIS receiver is actually hearing anything.......
Also an excellent idea, and quicker. No soldering! >> Stay informed about: Garmin Gps/Plotters already supporting AIS? |
|
| Back to top |
|
| |
External
Since: May 10, 2005
Posts: 112
|
(Msg. 8) Posted: Wed Apr 19, 2006 7:01 pm
Post subject: Re: Garmin Gps/Plotters already supporting AIS? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks Brad,
The AIS receiver selled by Nobeltec is the NASA engine.
In this mean time, Raymarine released the 3.16 software update for
C-Series with excelent support for AIS.
I just hope that Garmin do something like Raymarine and upgrade the
software of GpsMap 276C to support AIS too.
Keep us informed.
Regards
Pascal >> Stay informed about: Garmin Gps/Plotters already supporting AIS? |
|
| Back to top |
|
| |
| Related Topics: | Garmin Gps/Plotters NMEA DSE - As Garmin put this week firmware updates to ALL marine chart plotters, almost just to include the Extended DSC NMEA Message (DSE), it would be nice if anybody expert in NMEA could tell us an explanation of this message. Thanks Pascal
Sitex GPS Plotters and Waypoint Uploading - Does anyone know if there is software that will allow waypoint uploading from a PC to a newer Sitex Gps plotter?
Garmin 75 - Hi Does anyone know where I can buy a mounting bracket for a Garmin 75? Preferably in the UK. Thanks
Garmin GPSMAP 162 - First I'd like to say that I know almost nothing about these units. I have installed the Mapsource software in my Desktop PC and have transferred the required info to the GPS unit. I have been using the GPS unit for over a year with no problems. I onl...
HELP!!GARMIN GPSMAP162 - I recently purchased a boat that included the GPSMAP162. the guy i bought the boat from said that the unit was just out of the box. i cannot seem to locate any satalites. it has an external antenna mounted to a pole on the gunnel of the boat. please, any... |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Search
Profile
Private Messages
Log in
