 |
|
|
| Related Topics: | crack fix - fiberglass - Howdy all, I've got some visible cracks at the bottom of my hull on my 16ft runabout. This past summer when using the boat I was getting a bit of water in it after having it sit for a while in the water (the bilge pump easily took care of it). I'm..
Planer on fiberglass? - I have a canoe that I am reworking. It's got a few holes in it and the keel board has chunks of fiberglass missing and deep cracks in the resin. Has anyone used a power planer on fiberglass as a way of removing it? Did it ruin your planer? I should..
Fiberglassing my daggerboard? - I would like to drill a couple holes in my mahogany daggerboard (on a 13' boat) and fill them with lead. Although I am sure the boat can handle it, I am not so sure about the daggerboard. I am thinking of sanding an 1/8" of an inch off it all aroun...
FYI for those working with fiberglass - After a day of working and grinding the deck of a project boat the one thing I didn't think of was,,,,,,,,fiberglass getting all over me. Well ,,,we learn from our mistakes right! Some people say to take a pair of panty hose and rub it off,,,,,,doesn't..
fiberglass for idoits - I have a old house boat that the fiberglass has separated from the wooden decks. The separated pieces have been ripped up not leaving much still in tack. What is the best solution for my problem. I have never worked with fiberglass or resealing decks.... |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
