Welcome to BoatingForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

Fiberglass on Wood damage

 
   Boating Forums (Home) -> Boat Building RSS
Related Topics:
Wood vs Fiberglass - My son and I are planning to build/buy a couple sea kayaks. We can throw them on the sail boat when we all cruise or use them here on the Columbia River. The point of is the issue of strength and of wood compared with a..

Fiberglassing over wood? - This is slightly off topic since I building a swim platform rather than a boat, but they use the same materials and both float... Anyhow, I found a big pile of pressure treated planks, weathered but in good I figured they had gotten..

Questions about Fiberglassing Wood - OurBoat.jpg (0/1) - Hello all. I had a few We just bought a 1973 Carver Mariner 28' flybridge sedan made of mahogany on the hull and teak in the cabin. I was wondering if anyone could help me out. Here goes.... I was wondering if it is possible to strip down..

Damage From Hurricane Jaun - There are a couple of things i need help on:- 1. The wind screen on my flybridge got busted and needs Any 2. My Bimini top needs replacing Where in easrern Canada in a shop that i can get some work done...

tidal wave damage - Seems to me the best thing they can do is get all those fishing boats back in the water so the people can start fishing again ASAP instead of spending all their time building refugee camps. The people can live on the boats while the houses are being..
Next:  Boat Building: Colvic Springtide 25  
Author Message
timeoff

External


Since: Oct 25, 2003
Posts: 1



(Msg. 1) Posted: Sun Oct 26, 2003 1:25 am
Post subject: Fiberglass on Wood damage
Archived from groups: rec>boats>building, others (more info?)

Hi,

I am new to boating and learning fast...just not fast or soon enough.

Ok..so I bought a 1942 80' Wheeler that started as wood and was C-flex? and
or West System fiberglassed in the mid 80's. I am told that
the process was to add 1/2" marine grade plywood, then 2-3 layers of cloth
and then 10-14 layers of epoxy. It appears currently to be aging
very well on the outside with no signs of stress cracking. I was further
told that George Saroukos Shipyard in Fl. did the work.

My problem- The seller failed to alert me that he had run aground back in
June and that one of the shaft struts pushed through the bottom
of the boat causing the boat to take on water above one engine. The repair
was a temporary patch. The seller, I guess could not afford to
complete the work and sold to me at what I thought was a great
price...sigh...I know..I know...

I am new to this age and size of boating. My goal was to create a nice
adventure....not a nightmare for my family.

What should I do? The boat is located in South Alabama.

thanks for your help,

marshall

Plese email to my address and post.

 >> Stay informed about: Fiberglass on Wood damage 
Back to top
Login to vote
Josh Assing

External


Since: Oct 25, 2003
Posts: 5



(Msg. 2) Posted: Sun Oct 26, 2003 1:25 am
Post subject: Re: Fiberglass on Wood damage [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Fix the damage, or dump the boat -- dont' run with a 1/2 assed repair.

Fiberglass "wicks" water -- so if the fiberglass there was cracked & left in the
water -- you may have wood rot that needs to be repaired.

Can't go w/o saying "When buying a boat, ALWAYS have it surveyed"

you'll need to have the strut properly repaired & shaft re-aligned. This will
require a haul out. (at 80' -- ouch!)

On Sat, 25 Oct 2003 22:25:49 GMT, "timeoff" <meakes@"triad".rr.com> wrote:

 >Hi,
 >
 >I am new to boating and learning fast...just not fast or soon enough.
 >
 >Ok..so I bought a 1942 80' Wheeler that started as wood and was C-flex? and
 >or West System fiberglassed in the mid 80's. I am told that
 >the process was to add 1/2" marine grade plywood, then 2-3 layers of cloth
 >and then 10-14 layers of epoxy. It appears currently to be aging
 >very well on the outside with no signs of stress cracking. I was further
 >told that George Saroukos Shipyard in Fl. did the work.
 >
 >My problem- The seller failed to alert me that he had run aground back in
 >June and that one of the shaft struts pushed through the bottom
 >of the boat causing the boat to take on water above one engine. The repair
 >was a temporary patch. The seller, I guess could not afford to
 >complete the work and sold to me at what I thought was a great
 >price...sigh...I know..I know...
 >
 >I am new to this age and size of boating. My goal was to create a nice
 >adventure....not a nightmare for my family.
 >
 >What should I do? The boat is located in South Alabama.
 >
 >thanks for your help,
 >
 >marshall
 >
 >Plese email to my address and post.
 ><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Fiberglass on Wood damage 
Back to top
Login to vote
Jere Lull

External


Since: Sep 22, 2003
Posts: 41



(Msg. 3) Posted: Mon Oct 27, 2003 3:24 am
Post subject: Re: Fiberglass on Wood damage [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

timeoff wrote:

 >Ok..so I bought a 1942 80' Wheeler that started as wood
 >
That's a lot of old boat for a newbie.....

 >My problem- The seller failed to alert me that he had run aground back in
 >June and that one of the shaft struts pushed through the bottom
 >of the boat causing the boat to take on water above one engine. The repair
 >was a temporary patch.
 >
 >I am new to this age and size of boating. My goal was to create a nice
 >adventure....not a nightmare for my family.
 >
Get a survey! By someone that knows that type of construction in that
size; it's unusual as I think you have guessed.

Combine this with your insurance survey: I have found all the surveyors
I and my dockmates trust on the BOAT/US preference list, most of the
ones we had heard weren't as good were NOT on their list. You have to
get the insurance survey anyway.

Hey! What happened to the pre-purchase survey?

You should at least have had an insurance survey that could catch a
problem like that. (Oh, maybe that's how you found out!) A proper one
should also give a good indication of the cost to repair to the
insurance company's standards.

6 months qualifies as temporary, particularly as it probably didn't get
stressed much while it was for sale.

Who knows? Maybe the temporary patch is actually sufficient. (We live on
our dreams here....)

'Course the prop and strut could need work, and the engine and trans
might have been stressed in that hard a grounding, but that sounds like
a big old tough boat that was made even tougher less than 20 years ago,
making it a youngster in the fiberglass age.

--
Jere Lull
Xan-a-Deux ('73 Tanzer 28 #4 out of Tolchester, MD)
Xan's Pages: <a style='text-decoration: underline;' href="http://members.dca.net/jerelull/X-Main.html" target="_blank">http://members.dca.net/jerelull/X-Main.html</a>
Our BVI FAQs (290+ pics) <a style='text-decoration: underline;' href="http://homepage.mac.com/jerelull/BVI/" target="_blank">http://homepage.mac.com/jerelull/BVI/</a><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Fiberglass on Wood damage 
Back to top
Login to vote
Parallax

External


Since: Oct 27, 2003
Posts: 96



(Msg. 4) Posted: Mon Oct 27, 2003 9:54 pm
Post subject: Re: Fiberglass on Wood damage [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Jere Lull <jerelull.RemoveThis@mac.com> wrote in message news:<3F9C65CE.9060102.RemoveThis@mac.com>...
 > timeoff wrote:
 >
  > >Ok..so I bought a 1942 80' Wheeler that started as wood
  > >
 > That's a lot of old boat for a newbie.....
 >
  > >My problem- The seller failed to alert me that he had run aground back in
  > >June and that one of the shaft struts pushed through the bottom
  > >of the boat causing the boat to take on water above one engine. The repair
  > >was a temporary patch.
  > >
  > >I am new to this age and size of boating. My goal was to create a nice
  > >adventure....not a nightmare for my family.
  > >
 > Get a survey! By someone that knows that type of construction in that
 > size; it's unusual as I think you have guessed.
 >
 > Combine this with your insurance survey: I have found all the surveyors
 > I and my dockmates trust on the BOAT/US preference list, most of the
 > ones we had heard weren't as good were NOT on their list. You have to
 > get the insurance survey anyway.
 >
 > Hey! What happened to the pre-purchase survey?
 >
 > You should at least have had an insurance survey that could catch a
 > problem like that. (Oh, maybe that's how you found out!) A proper one
 > should also give a good indication of the cost to repair to the
 > insurance company's standards.
 >
 > 6 months qualifies as temporary, particularly as it probably didn't get
 > stressed much while it was for sale.
 >
 > Who knows? Maybe the temporary patch is actually sufficient. (We live on
 > our dreams here....)
 >
 > 'Course the prop and strut could need work, and the engine and trans
 > might have been stressed in that hard a grounding, but that sounds like
 > a big old tough boat that was made even tougher less than 20 years ago,
 > making it a youngster in the fiberglass age.




Wood Boats? What a bizarre concept. Why wood, isnt fibreglas enough work?<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Fiberglass on Wood damage 
Back to top
Login to vote
Display posts from previous:   
   Boating Forums (Home) -> Boat Building All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]