Welcome to BoatingForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Evinrude outboard recoil

 
   Boating Forums (Home) -> Boat General Discussion RSS
Next:  Gel cell batteries - why?  
Author Message
rmisiurak

External


Since: Sep 25, 2003
Posts: 1



(Msg. 1) Posted: Thu Sep 25, 2003 2:24 pm
Post subject: Evinrude outboard recoil
Archived from groups: rec>boats (more info?)

I own a 1995 Evinrude 4HP outboard. model# E4RDHLEOD. The pull chord
was pulled out from the recoil this weekend and I am hoping that
someone can tell me what I need to do to rethread the line. On this OB
the recoil is side mounted.

Any assistance is appreciated.

Thanx,

Rick

 >> Stay informed about: Evinrude outboard recoil 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Old Evinrude Outboard - I've seen many posts about this but I'd like to double check. I've got an old 1967 3HP Evinrude model 3716 that I'm bringing back from the dead. So far I've freed the seized heads, rebuild the stator, have spark, and cleaned the carbs. It's time for..

what year is my 25 hp evinrude outboard - From the manual it say e25rlcn. Any idea of a year of range of years it could be. Where is the serial number located on the motor. Thanks Mike

Evinrude outboard question - I have a 1979 115hp Evinrude outboard. We're trying to change the impeller. We removed a bolt which held the top of a shaft in a bracket in the top part of the motor, then removed 5 bolts from the lower end and tried to drop it down, but it is stuck..

83 Evinrude outboard question - I am new to boating and this group. I spent a couple of hours searching this groups archives for information on my problem and found a couple of "kinda like" matches but would appeciate feedback to help me decide next step. (kinda matched lower...

115 Evinrude outboard trim problem - I have a 115 hp Evinrude outboard model # 115999R (don't know what year). The trim quit working. The motor for it still whirs and sounds the same when I push the down button, but since it's stuck in the down position it doesn't move. When I push the up..
   Boating Forums (Home) -> Boat General Discussion All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]