Welcome to BoatingForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

how to Cruise control ?

 
   Boating Forums (Home) -> Boat General Discussion RSS
Next:  How to clean your boat?  
Author Message
winder21

External


Since: Dec 28, 2004
Posts: 11



(Msg. 1) Posted: Tue Dec 28, 2004 4:14 am
Post subject: how to Cruise control ?
Archived from groups: rec>boats (more info?)

Every boat has a cruising "comfort zone" that yields an optimum mix of
speed and fuel efficiency. You could find that exact speed. All you'd
need do is borrow the radar gun, digital tachometer, transducers and
fuel-flow gauges used by our staff, then spend a morning on the lake
running at various throttle settings.


Or, you could get a 95-percent approximation of your boat's optimum
cruise speed by simply following a few simple rules our experts have
concocted after performing hundreds of detailed boat tests. These hints
apply primarily to gas-powered, planing-hull boats since this is the
type of boat most of our readership owns.
Somewhere between planning out and top speed, there is a combination of
speed and engine load that will yield the maximum number of miles per
gallon. To make a broad generalization, this "sweet spot" usually
occurs somewhere between half and three-quarter throttle.


If your boat is marginal on power, this generality may not apply, but
if you selected an engine that can hold your boat comfortably on plane
at half throttle or less, the formula works. For a large number of V-6-
and V-8-powered runabouts, optimum cruise speed falls somewhere between
3,000 and 3,500 rpm.
To further optimize fuel efficiency, make sure your boat is running
level and in trim. Weight distributed unevenly front to back or side to
side will cut into running efficiency, so you may want to move gear and
passengers to level the load.


If you have an outboard or I/O-powered boat, you can also adjust the
drive for optimum efficiency. Begin with the drive down, then gradually
raise it with your trim adjustment.
Notice how the speed and rpms increase as you raise the drive. Raising
the drive decreases the drag of the lower unit in the water, and it
also allows the bow to rise, which reduces the wetted surface of the
hull.


As you continue to raise the drive, you will eventually cause the
propeller to cavitate. Your optimum drive setting is a few degrees shy
of this mark.

Best regards
http://www.geocities.com/winder21/ windersports portal
Your guide to winder's interest on sports : provides tips and
techniques to improve your game.

 >> Stay informed about: how to Cruise control ? 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
What is 'cruise speed' ? - You often see the 'cruise speed' mentioned in boat descriptions and brochures. But what is this speed and how is it determined?

Planning the cruise is a lot of fun! - Soon as we get past the October issue deadlines, we're off and gone. Since we enjoy taking a tax deduction for a portion of our boating expenses, I need to do some "work" while we're away. Each year before we head north on our longest cruise o...

cruise ship - Hi! I´ve been working on a cruise ship for one month and than I return back to my home country because of serious family problems. My cruise ship paid the return ticket and now (after 6 months) they want me to pay their money back. It would not be a..

Cruise and Carry - Just curious if anyone had an suggestions or advice: I just bought an old cruise and carry 2.7hp, and the pinion gear has several teeth missing and wont transfer power from the drive shaft to the propeller. Whats the best way to remove the old pinion..

A little cruise video. - http://www.youtube.com/watch?v=tVoMtPFtEg0&mode=related&search=
   Boating Forums (Home) -> Boat General Discussion All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]