Welcome to BoatingForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Bateau C17 or C19

 
   Boating Forums (Home) -> Boat Building RSS
Next:  Introduction to Inflatable Life Jackets  
Author Message
Jerry

External


Since: Aug 12, 2006
Posts: 10



(Msg. 1) Posted: Tue Jul 31, 2007 10:03 am
Post subject: Bateau C17 or C19
Archived from groups: rec>boats>building (more info?)

Has anyone built a Bateau C17 or C19? If so, I would be interested in
hearing your comments about the construction and the boat's actual
performance on the water.

Thanks,
Jerry

 >> Stay informed about: Bateau C17 or C19 
Back to top
Login to vote
Atlantic Survey Professio

External


Since: Aug 14, 2007
Posts: 1



(Msg. 2) Posted: Tue Aug 14, 2007 4:17 pm
Post subject: Re: Bateau C17 or C19 [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Jerry

Go to bateaus forums. There are several builders of that boat there which
are more than willing to share thier experiences. I built the C21 and am
very pleased with the boat and can highly recomend the plans and the
building process.

Ernie

"Jerry" <jerry.TakeThisOut@graphicsounds.net> wrote in message
news:sI-dnW7HpK7U3DLbnZ2dnUVZ_tijnZ2d@comcast.com...
> Has anyone built a Bateau C17 or C19? If so, I would be interested in
> hearing your comments about the construction and the boat's actual
> performance on the water.
>
> Thanks,
> Jerry
>

 >> Stay informed about: Bateau C17 or C19 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Bateau Cheap Canoe....? - Group, I've found a couple of creeks I want to explore and I've decided to put together the Bateau "Cheap Canoe". I don't expect much given that the plans are free and the materials minimal. Anyone built one to these plans? Any changes I shoul...

Bateau Fast Skiff 18 - Has anyone built or have any input to building this SAG boat? Jerry

nu2 woodworking - my epoxied wood is delaminating,.. - ahoy, I epoxied some one inch strips of wood in slats to make up a little decorative rope bin which was intended to sit on deck but it warped and popped apart in about 3 days in a damp shop. Does everything have to be notched or biscuited or doweled and....

Anybody tried glueing cast aluminum parts together with ep.. - My outboard, 20hp Honda, jumped off my transom yesterday and hit the pavement at 20-25mph. No critical damage but knocked a gapping hole, the size of a golf ball, in the cast aluminum lower pan, the one below the power head, next to the tiller handle...

lofting software - Looking for some software to loft a kayak so I can use a CNC router to cut my forms. Anyone know of anything? Thanks
   Boating Forums (Home) -> Boat Building All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]