Attaching tubes to RIB

FAQ

Profile

Attaching tubes to RIB

Boating Forums (Home) -> Boat Building

Next: My first hydroplane

Author

Message

MMC1

External

Since: Apr 22, 2004
Posts: 60

(Msg. 1) Posted: Thu Apr 22, 2004 5:07 pm Post subject: Attaching tubes to RIB Archived from groups: rec>boats>building (more info?)

Hello all, My dad got hold of a "Brig" PVC rigid inflatable, and a set of new tubes. Anyone out there have instructions for changing these out? What do we use to remove the old tubes (chemical?) and what do we use to glue the new on? What should we clean the hull with prior to install? Looks like the hull slides into the tubes and then PVC strips are glued over the joint. Thanks, MMC. >> Stay informed about: Attaching tubes to RIB

Display posts from previous:

Related Topics:

Sikaflex 291 in 100 ml tubes. - Hi folks, Haven't posted in a while, too busy boating! Anybody know where I can buy 100 milliliter tubes of white Sikaflex-291 online cheap? I'm in love with this stuff after using it to install trim tabs. I also used it to mount a piece of marine..

Sealing partly-used glue tubes - Hi, I've always had a problem with those "construction tubes" of glue, silicon, etc. I never use the whole tube, but no matter what method I use (usually taping a plastic bag to the end), the glue in the "snout" gets hard before I...

Attaching a set of Winches to cabin top - How to go about attaching two winches to the top of cabin. These winches would be for spinnaker halyard and headsail halyard. Do the winches come with a base plate? How do you attach the plate of support for the winches? When the bolts, screws, or....

attaching new epoxy to old fiberglass - Hi, I have a large sportfisher that I want close up the salon windshield with a solid fiberglass panel. I was going to cover the windows with plywood and then fiberglass over it. I was going to use epoxy & glass versus polyester & glass. Can I...

Attaching teak decks to aluminum - I want to fit teak decks to my 37ft aluminum sailboat. Does anyone know whether I can fasten from below, to save all that tedious plug cutting, fitting and sanding? I thought that with aluminum it would be quite strong if I drilled from underneath -....

	Boating Forums (Home) -> Boat Building	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum