Aluminium & Stainless Steel off cuts

FAQ

Profile

Aluminium & Stainless Steel off cuts

Boating Forums (Home) -> Boat Building

Next: Golant Gaffer website

Author

Message

occ

External

Since: Aug 18, 2003
Posts: 6

(Msg. 1) Posted: Fri Jul 11, 2003 4:10 pm Post subject: Aluminium & Stainless Steel off cuts Archived from groups: rec>boats>building (more info?)

I have a large stock of off cuts. Aluminium up to 6mm thick. Stainless & Mild Steel up to 8mm thick. I can cut to size, laser cut holes & profiles, and bend or fold I am in Cardiff UK and can arrange delivery >> Stay informed about: Aluminium & Stainless Steel off cuts

Display posts from previous:

Related Topics:

Is it ok to use stainless bolts with aluminium? - Hi Thanks for replies to my earlier posting about securing my new fairleads. I have managed to gain access to underneath the relevant bit of the boat, so I can hopefully do a proper job viz a vis backing plates. Is it ok to use stainless nuts and..

Stainless steel manifolds - Dear Fellow Boaties, I have good news to share with you. A friend of mine on the Gold Coast, Australia is making custome made stainless steel manifolds and mufflers that give superior performance and are competitively priced. If you are interested..

5mm thick stainless steel - Hi I have some 5mm thick stainless steel About 245mm x 1200mm If you would like to buy some or all of this please email me I can cut to size drill and bend if required My email is john@occuk.co.uk

316 Stainless steel 3mm thick - 316 Stainless steel 3mm thick Hi I have 200dia circles of this material I can cut them to any size you require Or laser cut holes & profiles, and bends or folds at extra cost £1.50 each + posting email john@occuk.co.uk

Polishing stainless steel - Can anyone tell me how to polish raw stainless steel to get the nice shiny finish? I can get it up to a satin "brushed finish" with a belt sander, but I'd like to get it a bit nicer as its for my chainplates and bolted for all to see on a bulk...

	Boating Forums (Home) -> Boat Building	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum