Welcome to BoatingForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

95 Seadoo GTX Pump Repair

  
   Boating Forums (Home) -> Jet Ski RSS
Next:  Who makes the best Service Manual  
Author Message
SimonSays

External


Since: Jun 14, 2004
Posts: 13



(Msg. 1) Posted: Mon Jun 14, 2004 9:48 pm
Post subject: 95 Seadoo GTX Pump Repair
Archived from groups: rec>sport>jetski (more info?)
Hi,

I own a '95 Seadoo GTX that have the pump bearings shot.

I took it to a local dealer and was quoted $600-800 to have
it repaired - is this a reasonable amount?

Also, if I decide to fix it myself, do I need to pull out the drive
shaft and its bearings and seals or could I remove just the
nozzle, impeller housing, etc to replace the bearings? Any
special tools required?

TIA

 >> Stay informed about: 95 Seadoo GTX Pump Repair 
Back to top
Login to vote
Chris H

External


Since: Jan 22, 2004
Posts: 25



(Msg. 2) Posted: Mon Jun 14, 2004 10:22 pm
Post subject: Re: 95 Seadoo GTX Pump Repair [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I just had my 99 GTI impeller shaft, bearings and cone replaced. $368 at
Richardson Motor Sports, Richardson, Texas. No special tools to take the
pump off the ski, but you need special tools to remove the impeller. You
can send it off to www.impros.com and let them overhaul the pump. Then
you'll have to reinstall it.

Chris

 >> Stay informed about: 95 Seadoo GTX Pump Repair 
Back to top
Login to vote
Scottspjs

External


Since: Jun 24, 2003
Posts: 168



(Msg. 3) Posted: Mon Jun 14, 2004 11:26 pm
Post subject: Re: 95 Seadoo GTX Pump Repair [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
 >I took it to a local dealer and was quoted $600-800 to have
 >it repaire

geez,is he replacing the whole pump?

tell me what parts he is going to put in.

also if you are going to pull the pump,you may as well replace the carrier
bearing while you have it apart.the old ounce of prevention deal.
scott
scotts performance powersports<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: 95 Seadoo GTX Pump Repair 
Back to top
Login to vote
Scottspjs

External


Since: Jun 24, 2003
Posts: 168



(Msg. 4) Posted: Tue Jun 15, 2004 3:43 pm
Post subject: Re: 95 Seadoo GTX Pump Repair [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
 >I just had my 99 GTI impeller shaft, bearings and cone replaced. $368

Thats way more in line with what i would charge.scott
scotts performance powersports<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: 95 Seadoo GTX Pump Repair 
Back to top
Login to vote
W.S. ONeal

External


Since: Aug 02, 2003
Posts: 75



(Msg. 5) Posted: Fri Jun 18, 2004 6:45 am
Post subject: Re: 95 Seadoo GTX Pump Repair [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Simon,
I charged a customer $55.00 for parts ( two bearings, a cone oring , pump
oil and one seal) and $97.50 for labor to do the same job today. $600-$800 ?
Yeah, I'd say he is OVERPRICED!

Bill O'Neal
WCM

"SimonSays" <a2omega.DeleteThis@earthlink.net> wrote in message
news:40cdf05c.71747707@news.east.earthlink.net...
 > Hi,
 >
 > I own a '95 Seadoo GTX that have the pump bearings shot.
 >
 > I took it to a local dealer and was quoted $600-800 to have
 > it repaired - is this a reasonable amount?
 >
 > Also, if I decide to fix it myself, do I need to pull out the drive
 > shaft and its bearings and seals or could I remove just the
 > nozzle, impeller housing, etc to replace the bearings? Any
 > special tools required?
 >
 > TIA<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: 95 Seadoo GTX Pump Repair 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
97 GTX Seadoo - digital display - Can someone advise me if there is a fuse for the digital read-out portion of the instruments. My analog gauges are working but my digital display quit working while I was trying to start the engine. I noticed two power packs one in the rear next to....

W.T.B ULTRA 150 PUMP - LOOKING FOR A NEW OR USED PUMP FOR A ULTRA 150 OR A SKAT MAG PUMP. OR PARTS TO REBUILD A PUMP PLUS REAR CONE, EXIT NOZZLE AND PROP. LET ME KNOW BY EMAIL CJETCAM2@AOL.COM THANKS IN ADVANCE.

thick smoke after long idle seadoo GTX - When the jet ski idles for more than about a minute, the smoke gets really thick. This is especially annoying in long no wake zones. Is something gone bad or is this normal? Is there something I can clean or adjust? Matt

polaris fuel pump - First ride since storage SL650 hesitates and idles till dead, on restart i let idle for a few and if throttle is babied until wide open position I get full pickup and speed.where should i start to diagnose this problem? it still has the stock fuel pump/w...

seadoo hose clamp help - how do these work? http://www.parkeryamaha.com/index.asp?PageAction=VIEWPROD&ProdID=27088 I replaced the bearing in the driveshaft seal and bought a new one of these because I broke the rubber grease boot when i was taking the driveshaft out. I can't...
   Boating Forums (Home) -> Jet Ski All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]