Welcome to BoatingForumz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

115 Evinrude

 
   Boating Forums (Home) -> Boat General Discussion RSS
Next:  Bad day for boaters on Oahu...  
Author Message
stump




Joined: Jan 27, 2012
Posts: 1



(Msg. 1) Posted: Wed Feb 01, 2012 9:47 am
Post subject: 115 Evinrude

Could someone tell me the weight of a 1994 115 Evinrude 4 cyl motor with trim?

 >> Stay informed about: 115 Evinrude 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Evinrude Help - My mid to late 60's Evinrude (40HP) sometimes jumps out of gear, but only for a few seconds, what might be the cause of this? The motor will go into gear fine but under power it will jump out of gear and loose power and than go back into gear again with ...

HELP! Evinrude 48 SPL - I have a 1994 Evinrude 48 SPL that will not accelerate. It idles fine but when I accelerate it just plows through the water and want rev up. I have replaced the plugs and checked the wires but it does not seem to help. Also the lower unit seems to be..

HELP: Evinrude will not go - I have a Evinrude 48 spl that idles and revs fine in neutral but when I put it in gear it just chugs and has no power. Any thoughts? Any help would be most appreciated. Thank you.

Evinrude 3HP??? - I'm about to go look at a '96 Evinrude 3HP motor with the objective of possibly buying it. Can someone shed some light on this engine, such as: Is it a single cylinder or two? When did production of the 3HP _Evinrude_ stop? Today I see only Johnsons...

2000 Evinrude 4 stroke - I have a pull start with 30 hours on motor. The rope start will not engage the flywheel. Any ideas what might be wrong. This motor is just like new.
   Boating Forums (Home) -> Boat General Discussion All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]